S2K Commerce - Products Dropdown

Actions
Loading...

S2K Commerce - Shopping Cart

Actions
Loading...
Edmonton West: +1 (780) 489-6663
NEW HOURS: MON-FRI 9-6 | SAT 9-5 | SUN 11-4
Edmonton North: +1 (780) 406-7030
NEW HOURS: MON-WED, FRI 9-6 | THU 9-7 | SAT 9-5 | SUN 11-4
Calgary: +1 (403) 520-7658
NEW HOURS: MON-SAT 9-5 | SUN 11-4
Proudly Canadian
ALL PRICES IN CAD

S2K Commerce - Order Entry

Actions
Loading...
1 - 24 of 1417 ▶|
View:
 
Description
Price
Quantity
Installing an aftermarket receiver in many late model GM vehicles means losing the chime that warns the door is open, along with audible safety warnings. The Crux SOCGM-17 GM Class II Data Bus interface lets you replace the factory receiver in these vehicles and keep the door chime and all audible safety warnings. Connect the SOCGM-17 to the wiring harness on your new car stereo, mount the module in a convenient location, and plug it into the existing factory plug. Get the great sound you want, and keep all important safety features intact. This interface does not work with GM's Premium Bose® systems or Onstar®, and it won't allow you to keep your factory steering wheel audio controls. It will work with the standard Bose system. Warranty: 1 year. Important Note: If you do not use an interface like this when you replace your factory radio, you will disable the audible warning system in your vehicle. Crutchfield cannot provide a free wiring harness for your vehicle, and we strongly recommend that you use the recommended interface when replacing this vehicle's factory radio. Failure to do so may result in serious injury or death. Highlights: lets you install an aftermarket receiver in late model GM vehicles without losing the door chime and audible safety warnings will not work with factory steering wheel controls, Bose® or OnStar® systems dimensions: 3-7/16"W x 1-1/16"H x 2-7/8"D warranty: 1 year MFR # SOCGM-17 What's in the box: CRUX SOCGM-17 Wiring Interface owner's manual 2000-up GM Class II radio replacement interface module 11" GM Class II wiring harness Installation Instructions
Item#:
135-SOCGM-17
Manufacturer Item:
SOCGM-17
Manufacturer:
Crux
Avail #:
In Stock
101.9900
84.99
EACH
Description: The CRUX SOCGM-18 retains General Motors factory-featured safety and warning chimes  for installation of after-market radios. It provides 12 Volt Accessory output (4 Amp), including RAP (Retained Accessory Power), Illumination Output (2A. max), telephone negative mute trigger (output to new stereo), low voltage (battery run-down protection), and adjustable chime volume. General Features: Retains factory features in select GM LAN 29 Bit vehicles with aftermarket radios Supports Bose, non-Bose and Y-91 audio systems. Retains factory front and rear parking sensors. Retains safety and warning chime functions. Adjustable Chime Volume EIA color coded wiring for easy installation. Authorized Internet Dealer 1-year Manufacturer's Warranty Compatible Vehicles Buick 2008-2015 Enclave 2006-2011 Lucerne Cadillac 2006-2011 DTS 2007-2014 Escalade 2007-2009 SRX Chevrolet 2007 - 2013 Avalanche* 2007 - 2008 Equinox 2008-2916 Express Van** 2006 - 2013 Impala / Impala SS 2006 - 2007 Monte Carlo 2007-2013 Silverado 1500-3500 Pickup* 2007-2014 Suburban* 2007-2014 Tahoe* 2009-2015 Traverse GMC 2007-2015 Acadia 2008-2013 Savana** 2007-2013 Sierra 1500-3500 Pickup* 2007-2014 Yukon* Hummer 2008-2009 H2 Pontiac 2007-2009 Torrent Saturn 2007-2010 Outlook 2008-2009 Vue Suzuki 2007-2008 XL7 Notes: Please confirm the above options prior to removing the factory radio. Some features may have to be turned on using factory menu options. *Not compatible with 2012-up SUVs/trucks that are equipped with factory-installed Navigation radios. **Not compatble with diesel-powered Express and Savana vans. Supports Rear Entertainment System with special order harness #CJA2333A, sold separately. Does not support OnStar. Does not support steering wheel retention.
Item#:
135-SOCGM-18
Manufacturer Item:
SOCGM-18
Manufacturer:
Crux
Avail #:
In Stock
142.9900
118.99
EACH
Descriptions: The CRUX SOCVW-21 is a radio replacement interface for select Volkswagen vehicles. It facilitates the integration of an after-market radio to retain factory features with Amplified and Non-Amplified Systems. General Features: Aftermarket Car Stereo Installation Interface For select 2002-Up Volkswagen Vehicles Works with amplified or non-amplified systems Retains factory-installed amplifiers With navigation outputs (Reverse gear, Illumination and speed signal) Provides Accessory Power (2A MAX) Authorized Internet Dealer 1-year Manufacturer's Warranty Compatible Vehicles Volkswagen 2012-2014 Beetle 2009-2014 CC 2006-2012 Eos 2002-2014 Golf 2006-2014 GTI 2002-2014 Jetta 2002-2014 Passat 2006-2011 Rabbit 2009-2014 Tiguan 2004-2010 Touareg Maserati 2004-Up Quattroporte
Item#:
135-SOCVW-21
Manufacturer Item:
SOCVW-21
Manufacturer:
Crux
Avail #:
In Stock
178.9900
124.99
EACH
The CRUX SOHTL-20 is a premium digital interface for select, late-model Toyota and Lexus vehicles, model years 2003 and up. It facilitates the integration of an after-market radio to the factory-fitted JBL/Premium audio system. Innovatively designed to be used with any aftermarket radio equipped with RCA output connections, for front and rear pre-amp outputs. General Features: Aftermarket Car Stereo Installation Interface For select 2003-Up Toyota and Lexus Vehicles with JBL Systems Retains factory JBL Amplifier Designed to be used with any aftermarket radio with RCA outputs for front & rear pre-amp outputs If your aftermarket radio has only one set of outputs, use "Y" splitters; there will be no fade control as a result Does not retain factory-installed Satellite radio Authorized Internet Dealer 1-year Manufacturer's Warranty Compatible Vehicles Lexus 2006 - 2009 GS 2006 - 2008 RX330/350 2006 - 2008 RX400h Toyota 2003 - 2010 4Runner 2005 - 2010 Avalon 2007 - 2012 Camry 2011 - 2011 FJ Cruiser 2008 - 2008 Highlander 2011 - 2012 Highlander 2004 - 2012 Prius 2004 - 2010 RAV4 2005 - 2011 Sequoia 2004 - 2012 Sienna 2006 - 2009 Solara 2005 - 2010 Tacoma 2004 - 2012 Tundra 2009 - 2010 Venza Notes: This unit Does Not retain Steering Wheel Controls. To retain all factory features and Steering Wheel Controls please select SWRTY-61J
Item#:
135-SOHTL-20
Manufacturer Item:
SOHTL-20
Manufacturer:
Crux
Avail #:
In Stock
149.9900
124.99
EACH
The CRUX SONGM-11 is designed to allow for the installation of after-market radios while retaining OnStar functionality with Bose Amplified & Non-Amplified Systems, while also retaining Chime & Accessory features in a wide range of General Motors Class II Data-bus vehicles. General Features: Aftermarket Car Stereo Installation Interface for GM Vehicles For select General Motors Class II Vehicles with Bose Amplified & Non-Amplified Systems Retains Factory OnStar Retains Factory Warning Chimes Works with Non-Bose, Standard Bose & Premium Bose / Y91 amplified systems Dimension: 5" L x 2.5" W x 8.8" H Authorized Internet Dealer 1-year Manufacturer's Warranty Compatible Vehicles Buick 2004 - 2005 Century 2005 - 2007 La Crosse 2004 - 2007 Rainer 2003 - 2007 Rendezvous 2005 - 2007 Terraza Cadillac 2004 - 2006 Escalade 2004 - 2006 Escalade ESV 2004 - 2006 Escalade EXT Chevrolet 2003 - 2006 Avalanche 2003 - 2005 Blazer S-10 2000 - 2005 Cavalier 2004 - 2011 Colorado 2005 - 2010 Corvette 2000 - 2005 Impala/ Impala SS 2001 - 2003 Malibu 2004 - 2004 Malibu (Classic) 2000 - 2005 Monte Carlo 2003 - 2004 Pickup S-10 2003 - 2006 Silverado 1500-3500 2007 - 2007 Silverado 1500-3500 (Classic) 2004 - 2006 SSR 2003 - 2006 Suburban 2003 - 2006 Tahoe 2002 - 2009 Trailblazer 2005 - 2009 Uplander GMC 2004 - 2011 Canyon 2002 - 2009 Envoy 2004 - 2007 Envoy XUV 2003 - 2007 Savana 2003 - 2006 Sierra 1500-3500 2007 - 2007 Sierra 1500-3500 (Classic) 2002 - 2004 Sonoma 2003 - 2006 Yukon/ XL Hummer 2003 - 2007 H2 2005 - 2010 H3/H3T Isuzu 2004 - 2008 Ascender 2006 - 2008 i280/i290/i350 Oldsmobile 2001 - 2004 Alero (w/RDS Radio) 2002 - 2004 Bravada 2002 - 2002 Intrigue 2000 - 2002 Silhouette (w/chime) 2003 - 2004 Silhouette Pontiac 2001 - 2005 Aztek 2001 - 2005 Grand AM 2004 - 2008 Grand Prix 2000 - 2005 Sunfire Saab 2005-2008 9-7X Saturn 2007 Relay
Item#:
135-SONGM-11
Manufacturer Item:
SONGM-11
Manufacturer:
Crux
Avail #:
In Stock
199.99
EACH
Wire in a new radio Crux's SOOCR-26 interface ensures that you can keep the factory amplifier in your Chrysler-made vehicle when you replace the factory radio; the interface also works in vehicles without a factory amplifier. Once you connect this interface to the wires on your new stereo's wiring harness, you've covered the power, ground, and factory speaker connections for your new stereo. The SOOCR-26 interface also offers the reverse, illumination, and Vehicle Speed Sensor (V.S.S.) outputs that you'll need if you're installing a navigation receiver. The Crux interface is designed to work with the factory Chrysler CAN-bus systems. Product highlights: connect a new stereo in select 2005-17 Chrysler, Dodge, and Jeep models provides connections for Vehicle Speed Sensor (V.S.S.), reverse gear, and illumination for installing navigation receivers works in systems with or without a factory amplifier warranty: 1 year MFR # SOOCR-26 What's in the box: Crux SOOCR-26 Wiring Interface owner's manual Radio replacement interface 1st Gen wiring harness 2nd Gen wiring harness Installation Instructions
Item#:
135-SOOCR-26
Manufacturer Item:
SOOCR-26
Manufacturer:
Crux
Avail #:
In Stock
160.9900
133.99
EACH
Wire in a new radio Crux's SOOFD-27 interface ensures that you can keep the factory speaker system in your Ford, Lincoln, or Mercury vehicle when you replace the factory radio. Connect the wires from this interface to the wires on the new stereo's wiring harness, and your power, ground, and factory speaker connections are covered. If your audio system has a factory amp and sub, the Crux interface can also keep them working too. The Crux interface lets you keep your car's auxiliary input active as well, but you'll have to choose a new car stereo with a rear aux input, as the Crux adapter's RCA connectors plug into that rear input. The SOOFD-27 interface also offers the parking brake, reverse, mute, and Vehicle Speed Sensor (V.S.S.) outputs that you'll need if you're installing a navigation receiver. If you like your radio to keep playing after your vehicle is turned off, this interface also supports Retained Accessory Power (RAP) which keeps the music going until the door is opened. Important Installation Notes The SOOFD-27 interface is not compatible with factory SONY systems or the THX amplified systems. If you're keeping your factory sub, you'll need to choose a car stereo with a dedicated sub preamp output (full-range preamp outputs will not work). If you're keeping your vehicle's aux input, you'll want to choose a car stereo with a rear aux input, preferably RCA inputs that the SOOFD-27's RCA connectors can plug into. Product highlights: connect a new stereo to your factory wiring plug and retain Retained Accessory Power (RAP) provides connections for parking brake, Vehicle Speed Sensor (V.S.S.), reverse gear, and illumination for installing navigation receivers retains factory amp and subwoofer retains your car's auxiliary input; new car stereo must have rear aux input to accept adapter's RCA connectors warranty: 1 year MFR # SOOFD-27 What's in the box: Crux SOOFD-27 Wiring Interface owner's manual Radio replacement interface module (for Ford/Lincoln/Mercury) Wiring harness Installation Instructions
Item#:
135-SOOFD-27
Manufacturer Item:
SOOFD-27
Manufacturer:
Crux
Avail #:
In Stock
149.9900
124.99
EACH
You'll only be able to retain your steering wheel audio controls with a compatible car stereo made by Alpine, Clarion, Dual, JVC, Kenwood, Pioneer, or Sony. No other brands are currently compatible. Replacing the factory radio in many late model GM vehicles means losing the chime that warns the door is open, along with audible safety warnings. Also, your new car stereo will not work with your GM steering wheel audio controls. The SOOGM-15 GM Class II Data Bus interface from Crux lets you install an aftermarket receiver in these vehicles and keep the door chimes, all audible safety warnings, and OnStar functionality in select GM vehicles. You'll also retain the use of your factory steering wheel controls in most vehicles (see the compatibility chart in Details  vehicles that do not retain use of steering wheel controls are marked by an asterisk). Connect the SOOGM-15 to the wiring harness on your new car stereo, mount the module in a convenient location, and plug it into the existing factory plug. Get the great sound you want, and keep all important safety features intact. The SOOGM-15 interface works with all GM audio systems, including Premium Bose® . Warranty: 1 year. Important Note: If you do not use an interface like this when you replace your factory radio, you will disable the audible warning system in your vehicle. JB's PowerCentre cannot provide a free wiring harness for your vehicle, and we strongly recommend that you use the recommended interface when replacing this vehicle's factory radio. Failure to do so may result in serious injury or death. Installation Note: If your vehicle has a factory amplifier, you'll lose fader and balance control with the new car stereo. You'll want to set your system's balance and fader controls correctly before installing the new car stereo, as those settings are retained after you've pulled out the old radio. Highlights: lets you install an aftermarket receiver in late model GM vehicles without losing the door chime and audible safety warnings works with any Bose® system, retains OnStar® functionality retains steering wheel audio controls with a compatible car stereo in most vehicles (see chart in Details) dimensions: 3-7/16"W x 1-1/16"H x 2-7/8"D warranty: 1 year MFR # SOOGM-15 What's in the box: CRUX SOOGM-15 GM Wiring Interface owner's manual 2000-up GM Class II radio replacement interface module (w/ OnStar and SWC retention) 15" GM Class II wiring harness (w/ SWC connector) Bose adapter Antenna adapter Installation Instructions
Item#:
135-SOOGM-15
Manufacturer Item:
SOOGM-15
Manufacturer:
Crux
Avail #:
In Stock
327.9900
272.99
EACH
Description: The CRUX SOOGM-16 is designed to allow for the installation of after-market radios while retaining functionality of OnStar, Bose® Amplified and Non-Amplified Systems, Chime and Accessory features in General Motors LAN 29-Bit vehicles. Also retains steering wheel controls. General Features: Easy Plug-and-Ready Connections. Retains Steering Wheel Controls via built-in, pre-programmed interface. Retains Factory Bluetooth in Vehicles 2008-upwards if equipped with new OnStar Device. Retains Factory OnStar. Retains Factory Warning Chimes. Works with Non-Bose and BOSE amplified systems. Retains Rear Seat Entertainment, Audio/Video. Requires Cable #CRUX2333A (sold separately). Retains Back-up Camera. Authorized Internet Dealer 1-year Manufacturer's Warranty Compatible Vehicles Buick 2008-14 Enclave 2006-11 Lucerne Cadillac 2006-10 DTS 2007-14 Escalade 2007-09 SRX Chevrolet 2007-13 Avalanche* 2007-09 Equinox 2008-11 Express 2006-13 Impala 2006-07 Monte Carlo 2007-14 Silverado* 2007-14 Suburban* 2007-14 Tahoe* 2009-14 Traverse GMC 2007-14 Acadia 2008-11 Savana 2007-13 Sierra* 2007-14 Yukon* Hummer 2008 - 2009 H2 Pontiac 2007 - 2009 Torrent Saturn 2007-09 Outlook 2008-09 Vue Suzuki 2007 - 2008 XL7 Compatibility Notes: *Not compatible for 2012-up SUVs/trucks that are equipped with factory-installed Navigation radios. For those vehicles, use SOOGM-16A (which is compatible)
Item#:
135-SOOGM-16
Manufacturer Item:
SOOGM-16
Manufacturer:
Crux
Avail #:
In Stock
272.99
EACH
The CRUX SWRCR-59 is a radio replacement interface for select Chrysler, Dodge & Jeep vehicles 2004-2015. It facilitates the integration of an aftermarket radio to retain factory features in select models. This enhanced interface is also pre-programmed for retention of steering wheel controls. General Features: Aftermarket Car Stereo Installation Interface Retains select factory features when installing an aftermarket radio Retains factory-installed Amplifier Retains Steering Wheel Controls via built-in, pre-programmed interface With navigation outputs (Reverse gear , Illumination and Speed signal) Provides Accessory Power ( 2A MAX ) Dimension: 3.5" L x 2.5" W x 7" H Authorized Internet Dealer 1-year Manufacturer's Warranty Compatible Vehicles Chrysler 2011 - 2014 200 2005 - 2010 300/300C 2007 - 2009 Aspen 2006 - 2010 PT Cruiser 2007 - 2010 Sebring 2008 - 2016 Town & Country Dodge 2007 - 2014 Avenger 2007 - 2012 Caliber 2008 - 2014 Challenger 2006 - 2010 Charger 2013 Charger 2006 - 2011 Dakota 2008 - 2009 Durango 2011 - 2013 Durango 2009 - 2016 Grand Caravan 2009 - 2010 Journey 2013 Journey 2005 - 2008 Magnum 2007 - 2011 Nitro 2006 - 2012 Ram Jeep 2006 - 2010 Commander 2007 - 2016 Compass 2005 - 2013 Grand Cherokee 2008 - 2012 Liberty 2007 - 2016 Patriot 2007 - 2016 Wrangler Mitsubishi 2006 - 2009 Raider Volkswagen 2009 - 2013 Routan Compatibility Notes: The Front and Rear fading are NON-Adjustable on amplified systems. Also supports radio replacement in vehicles with 4.3 and 8.4 color screens. Not compatible with Canadian model 2007 RAM trucks with Infinity sound system *Note: Does not retain Uconnect
Item#:
135-SWRCR-59
Manufacturer Item:
SWRCR-59
Manufacturer:
Crux
Avail #:
In Stock
263.9900
219.99
EACH
You'll only be able to retain your steering wheel audio controls with a compatible car stereo made by Alpine, Boss, Clarion, Dual, Fahrenheit, Jensen, JVC, Kenwood, Pioneer, Power Acoustik, Sony, or Soundstream. No other brands are currently compatible. Wire in a new radio Crux's SWRCR-59D interface ensures that you can keep your vehicle's steering wheel audio controls when you replace the factory radio. Connect this interface to the wires on your new stereo's wiring harness, and you've covered the power, ground, and factory speaker connections for your new stereo. The SWRCR-59D interface offers the parking brake, reverse, and Vehicle Speed Sensor (V.S.S.) outputs required to install a navigation receiver. The interface also retains the factory backup camera (if equipped) and 12-volt accessory power; you'll also be able to keep your AUX audio input and steering wheel audio control phone-button functions in select vehicles. Product highlights: connect a new stereo in select 2014-up Dodge, Fiat, Jeep and Ram vehicles retain your steering wheel audio controls with a compatible car stereo provides connections for Vehicle Speed Sensor (V.S.S.), reverse gear, and illumination for installing navigation receivers retains factory AUX input and backup camera (if equipped) retains 12-volt accessory power retains steering wheel phone-button functions in select vehicles warranty: 1 year MFR # SWRCR-59D What's in the box: Crux SWRCR-59D Wiring Interface owner's manual Radio replacement interface module Wiring harness 2 SWC harness SWC adapter cable Installation Instructions
Item#:
135-SWRCR-59D
Manufacturer Item:
SWRCR-59D
Manufacturer:
Crux
Avail #:
In Stock
239.9900
199.99
EACH
The CRUX SWRFD-60 is a radio replacement interface for select Ford, Lincoln & Mercury vehicles 2005-2014. It facilitates the integration of an aftermarket radio to retain factory features in select models. This enhanced interface is also pre-programmed for retention of steering wheel controls. General Features: Aftermarket Car Stereo Installation Interface For select 2007-2011 Ford & Lincoln Vehicles Retains select factory features with an aftermarket radio Retains factory-installed Subwoofer Retains Steering Wheel Controls via built-in, pre-programmed interface With navigation outputs (Reverse gear, Illumination and Speed signal) Provides Accessory Power (2A MAX) Dimension: 5" L x 2.5" W x 8.8" H Authorized Internet Dealer 1-year Manufacturer's Warranty Compatible Vehicles Ford 2007 - 2010 Edge 2008 - 2012 Escape 2007 - 2014 Expedition 2006 - 2010 Explorer 2007 - 2010 Explorer Sport Trac 2009 - 2014 F-150 2008 - 2012 F-250 2008 - 2012 F-350 2008 - 2012 F-450 2005 - 2007 Five Hundred 2009 - 2012 Flex 2008 - 2011 Focus 2005 - 2007 Freestyle 2006 - 2012 Fusion 2005 - 2013 Mustang 2008 - 2012 Taurus Lincoln 2009 - 2012 MKS 2007 - 2010 MKX 2007 - 2012 MKZ 2007 - 2014 Navigator 2006 - 2006 Zephyr Mercury 2007 - 2011 Mariner 2006 - 2011 Milan 2005 - 2007 Montego 2006 - 2010 Mountaineer Mazda 2009 - 2011 Tribute Notes: *Does not retain Uconnect Not compatible with factory installed Sony systems and THX systems w/ amplifier
Item#:
135-SWRFD-60
Manufacturer Item:
SWRFD-60
Manufacturer:
Crux
Avail #:
In Stock
384.9900
271.99
EACH
You'll only be able to retain your steering wheel audio controls with a compatible car stereo made by Alpine, Blaupunkt, Clarion, JVC, Kenwood, Pioneer, or Sony. No other brands are currently compatible. Keep your factory options Crux's SWRFD-60L interface ensures that you can keep the factory steering wheel controls in select 2003-up Ford, Lincoln, and Mercury models when installing a compatible aftermarket radio. Connect this interface to the wires on your new stereo's wiring harness, and you've covered the power, ground, and factory speaker connections for your new stereo. The interface retains the auxiliary input in your vehicle if you're installing a radio with a rear aux input. It'll also retain your Ford-installed subwoofer. Important Note: This adapter does not retain SYNC and it will not work in vehicles with Sony or THX audio systems. Product highlights: connect a new stereo in select 2003-up Ford, Lincoln, and Mercury models retain your steering wheel controls with select car stereos retains auxiliary input with compatible car stereo retains factory sub does not work with Sony or THX amplified systems does not retain SYNC warranty: 1 year MFR # SWRFD-60L What's in the box: Crux SWRFD-60L Wiring Interface owner's manual Radio replacement interface module (for Ford/Linc/Merc) Wiring harness SWC harnesses SWC adapter cable Aux harness Antenna adapter Installation Instructions
Item#:
135-SWRFD-60L
Manufacturer Item:
SWRFD-60L
Manufacturer:
Crux
Avail #:
In Stock
184.9900
153.99
EACH
Description: The CRUX SWRGM-48 is a premium interface for select General Motors Class II Vehicles. It facilitates the integration of an after-market radio to fully retain factory features in GM Class II Data bus vehicles for Bose Amplified and Non-Amplified Systems. This enhanced interface is also pre-programmed for retention of steering wheel controls. General Features: Retains factory features in select GM Class II Data Bus vehicles while functioning with an aftermarket radio. Pre-programmed to retain factory Steering Wheel Controls. Voice Recognition Command from factory SWC. Supports Bose, non-Bose and Y-91 audio systems. Retains chime functions. Built-in chime volume adjustment. EIA color coded wiring for easy installation. Authorized Internet Dealer 1-year Manufacturer's Warranty Compatible Vehicles: Cadillac 2003-2006 Escalade 2003-2006 Escalade ESV 2003-2006 Escalade EXT Chevrolet 2003-2006 Avalanche 2003-2005 Blazer S-10 2000-2005 Cavalier 2004-2012 Colorado 2005-2007 Corvette 2004-2004 Malibu (Classic) 2004-2004 Pickup S-10 2003-2006 Silverado 1500-3500 2007-2007 Silverado 1500-3500 (Classic) 2004-2006 SSR 2003-2006 Suburban 2003-2006 Tahoe 2002-2009 Trailblazer 2005-008 Uplander GMC 2004-2012 Canyon 2004-2009 Envoy 2004-2007 Envoy XUV 2003-2007 Savana 2003-2006 Sierra 1500-3500 2007-2007 Sierra 1500-3500 (Classic) 2002-2004 Sonoma 2003-2006 Yukon/ XL Hummer 2003-2007 H2 2006-2007 H3/H3T Isuzu 2004-2008 Ascender 2006-2008 i280/i290/i350 Saturn 2005-2007 Relay Notes: SWRGM-48Radio Replacement Interface w/ SWC Retention for GM Class II Vehicles DKGM-48DCombo Category Includes Double-DIN Installation Kit with SWRGM-48 DKGM-48SCombo Category Includes Single-DIN Installation Kit with SWRGM-48 The Front and Rear fading are not retained on Y-91 Bose System. Chime includes: seat belt, check engine, key in ignition, low fuel, low oil and lights on. *See pages 6 and 7 of the manual for Steering Wheel Control functions. The Front and Rear fading are not retained on Y-91 Bose System. Chime includes: seat belt, check engine, key in ignition, low fuel, low oil and lights on. *Analog Steering Wheel Controls. See pages 5 to 8 of the manual for Steering Wheel Control functions. The Front and Rear fading are not retained on Y-91 Bose System. Chime includes: seat belt, check engine, key in ignition, low fuel, low oil and lights on. *Analog Steering Wheel Controls. See pages 9 to 12 of the manual for Steering Wheel Control functions.
Item#:
135-SWRGM-48
Manufacturer Item:
SWRGM-48
Manufacturer:
Crux
Avail #:
In Stock
209.99
EACH
Description: The CRUX SWRVW-52 is a premium radio replacement interface for select Volkswagen vehicles. It facilitates the integration of an after-market radio to retain factory features with Amplified and Non-Amplified Systems. This enhanced interface is also pre-programmed for retention of steering wheel controls. General Features: Retains factory features in all CAN bus based Volkswagen models Retains factory-installed amplified systems, including Touareg (2004-2007) and Fender amplified systems Retains Steering Wheel Controls via built-in, pre-programmed interface With navigation outputs (Reverse gear , Illumination and Speed signal) Provides Accessory Power ( 2A MAX ) Authorized Internet Dealer 1-year Manufacturer's Warranty Compatible Vehicles Volkswagen 2012-2014 Beetle 2009-2014 CC 2006-2012 Eos 2002-2014 Golf 2006-2014 GTI 2002-2014 Jetta 2002-2014 Passat 2006-2011 Rabbit 2009-2014 Tiguan 2004-2010 Touareg Maserati 2004-up Quattroporte
Item#:
135-SWRVW-52
Manufacturer Item:
SWRVW-52
Manufacturer:
Crux
Avail #:
In Stock
306.9900
216.99
EACH
Using carefully selected resistors and a Zobel Network, the AC-LGD has been designed to generate load and stabilize signal from the factory system to ensure the best possible audio. The LGDs come in pairs and can be easily connected to your AudioControl Factory System Upgrade product with the pre-wired connectors.
Item#:
15-AC-LGD
Manufacturer Item:
AC-LGD
Manufacturer:
Audio Control
Avail #:
In Stock
55.9900
45.99
EACH
Add remote level control for your AudioControl processor or amplifier. This is the replacement remote for the Epicenter. Comes with a 20 foot cable and removable mounting enclosure (for custom dash installations). compatible with 6XS ACM-1.300 The Epicenter® Concert Series LC2i LC6i LC7i Overdrive Plus Matrix Plus LC-4.800 LC-6.1200 legacy products supported LC6 LC8 Original Epicenter® (bypass not supported)
Item#:
15-ACR-1
Manufacturer Item:
ACR-1
Manufacturer:
Audio Control
Avail #:
In Stock
83.9900
69.99
EACH
Add remote level control for your LCQ-1. This is the replacement remote for the Epicenter® Plus. Comes with a 20 foot cable and removable mounting enclosure (for custom dash installations). compatible with LCQ-1 The Epicenter® Plus legacy products supported LC7 DQL-8
Item#:
15-ACR-2
Manufacturer Item:
ACR-2
Manufacturer:
Audio Control
Avail #:
Special Order
95.9900
69.99
EACH
Add remote level control for your AudioControl processor or amplifier. This is the replacement remote for the LC8i, DQ-61, DQDX and The Epicenter® Amplifiers. Comes with a 20 foot cable and removable mounting enclosure (for custom dash installations). compatible with LC8i D-4.800 D-6.1200 DM-608 DM-810 DQ-61 DQDX The Epicenter® Amplifiers
Item#:
15-ACR-3
Manufacturer Item:
ACR-3
Manufacturer:
Audio Control
Avail #:
In Stock
83.9900
69.99
EACH
DABTR9 Bluetooth Receiver Marine Panel Rocker Knockout Style Switch Motorcycles ATV Connect To Source Unit or Amplifier With Auxiliary Input Water Resistant and Ideal for Motorcycles, All-Terrain Utility Vehicles, and More Includes Handle Bar Mount and Mounting Base for Surface Mounting Remote Trigger In/Out Water Resistant Touch Keypad For Marine Environment Direct To Battery Fused Wiring Via Internal Hard-Wire Installation Mounts to a standard carling switch opening 0.83" width x 1.45" Height
Item#:
165-DABTR9
Manufacturer Item:
DABTR9
Manufacturer:
Diamond Audio
Avail #:
Out Of Stock
113.9900
94.99
EACH
RGB LED APP Remote Controller/Eight outputs with remote trigger HXM Series speaker lighting Conformal coated PCB Control multiple functions such as color selection, brightness/dimming Change speed/strobe and various other lighting feature modes
Item#:
165-DARGB8A
Manufacturer Item:
DARGB8A
Manufacturer:
Diamond Audio
Avail #:
In Stock
113.9900
94.99
EACH
Product Details: Diamond Audio HXMRGBLC RF Remote control for RGB LED HXM Series speaker lighting Conformal coated PCB Control multiple functions such as color selection, brightness/dimming Change speed/strobe and various other lighting feature modes
Item#:
165-HXMRGBLC
Manufacturer Item:
HXMRGBLC
Manufacturer:
Diamond Audio
Avail #:
In Stock
89.9900
49.99
EACH
10 inch  LED/ RGB Black Subwoofer Grille Height: 1.41 / 35.8mm Outside Diameter: 10.91 / 277.0mm
Item#:
165-MS10GRLB
Manufacturer Item:
MS10GRLB
Manufacturer:
Diamond Audio
Avail #:
In Stock
47.9900
39.99
EACH
EXTRUDED ALUM FLAT MOUNT CLAMP BLACK
Item#:
165-MSFMCBLK
Manufacturer Item:
MSFMCBLK
Manufacturer:
Diamond Audio
Avail #:
In Stock
155.9900
129.99
EACH
1 - 24 of 1417 ▶|
View: