Home  > Sniper(x)
|◀ 1 - 12 of 437 ▶|
View:
SNIPER EFI 14IN AIR CLNR 1IN DROP BASE
Complete your Sniper EFI install with our 1" drop base to gain some extra under-hood room and unleash the full potential of your new fuel injection system without modification! The Sniper EFI air cleaner drop base was designed specifically for use with the Sniper EFI 4BBL throttle body and a 14" air cleaner element and lid. These stamped steel drop bases feature a generous 1" drop with the necessary clearance bulges for use of the front mounted fuel inlets on the Sniper EFI unit. Available in both black and chrome finishes to best match your Sniper EFI unit.
Item#:
272-120-510
Manufacturer Item:
120-510
Manufacturer:
Sniper
Available:
In Stock
Your Price:
38.93
EACH
SNIPER EFI 14IN AIR CLNR 1IN DROP BASE
Complete your Sniper EFI install with our 1" drop base to gain some extra under-hood room and unleash the full potential of your new fuel injection system without modification! The Sniper EFI air cleaner drop base was designed specifically for use with the Sniper EFI 4BBL throttle body and a 14" air cleaner element and lid. These stamped steel drop bases feature a generous 1" drop with the necessary clearance bulges for use of the front mounted fuel inlets on the Sniper EFI unit. Available in both black and chrome finishes to best match your Sniper EFI unit.
Item#:
272-120-511
Manufacturer Item:
120-511
Manufacturer:
Sniper
Available:
In Stock
Your Price:
31.13
EACH
12-875 & 12-876 REGULATOR KIT
When converting your fuel system to a return style EFI setup, the biggest challenge can be plumbing the fuel lines. Holley continues to be the leader in fuel system development to make your life easier! The new Holley EFI Filter Regulator assembly simplifies your installation by combining the fuel filter and regulator in one assembly that can be mounted in the rear of the vehicle. Thus making your return line much shorter. The aluminum assembly contains a 175 GPH 10 Micron filter and a regulator preset at 59.5 psi. The filter regulator comes in 3/8" NPT or 8 AN port sizes to match most EFI fuel systems.
Item#:
272-12-878
Manufacturer Item:
12-878
Manufacturer:
Sniper
Available:
In Stock
Your Price:
29.55
EACH
SNIPER EFI THROTTLE LEVER EXTENSION
Holley Sniper EFI throttle lever extensions bolt directly onto your current throttle lever, increasing the mechanical advantage of your throttle cable, or rod. This results in a significantly decreased pedal effort, and smoother pedal feel, especially at low throttle input, such as when you are leaving a stoplight. This product is perfect if a stiffer throttle pedal is noticed after an EFI conversion. Features: * Direct bolt-on installation * Hardware included * Decreases pedal effort for smoother driving characteristics * Corrects poor throttle cable/rod geometry
Item#:
272-20-16
Manufacturer Item:
20-16
Manufacturer:
Sniper
Available:
In Stock
Your Price:
18.59
EACH
SNIPER EFI 2X4 LINKAGE KIT - 4150
Holley Sniper EFI dual-quad linkage kits will allow you to get your 2 x 4 Sniper EFI throttle linkage adjusted properly on virtually any 2 x 4 intake manifold, or supercharger! Made from high-quality materials, these kits include two heim joint rod ends, one left hand thread and one right hand thread, three universal rods, and the necessary nuts, washers, and bolts. Features and specs include: * Universal length adjustable linkage rods allow you to properly tune your 2 x 4 Sniper throttle for virtually all intake manifold configurations * Rod lengths: 8, 7.25, and 5 in. * Rod thread pitch: 10-32, right and left hand thread
Item#:
272-20-43
Manufacturer Item:
20-43
Manufacturer:
Sniper
Available:
Out of Stock
Your Price:
42.99
EACH
FUEL SYSTEM KIT, VAPOR GAURD, W RETURN L
Holley EFI fuel kits are the perfect addition to your Sniper EFI or Holley EFI kit. They are engineered using Holley fuel pumps, regulators and filters coupled with quality Earl's plumbing to provide a fuel system tailored to the needs of your EFI System. The secret to Earl's Vapor Guard hose is in its layers. The innermost Primary Barrier Layer offers high resistance to heat and aggressive fuels. The middle Earl's Vapor Guard Barrier is a Thermoplastic layer that provides superior fuel isolation and virtually eliminates vapors from escaping through the hose. The Exterior Cover Barrier provides extreme tolerance to heat and ozone giving Earl's Vapor Guard a three way shield against hose deterioration.
Item#:
272-526-7
Manufacturer Item:
526-7
Manufacturer:
Sniper
Available:
Out of Stock
Your Price:
541.29
EACH
Forced Induction - Self-Tuning Kit + Handheld EFI Monitor - Shiny Finish
No problem, Holley also offers a 650 HP four injector version for lower horsepower applications with a power adder or someone just needing additional sensor inputs. Did we mention the Super Sniper also has full nitrous control built-in? That's right, no need for a separate nitrous controller! Every Super Sniper EFI system also comes with a USB to CAN tuning cable, as well as free downloadable Sniper EFI Software to give you unlimited control of your engine.
Item#:
272-550-512
Manufacturer Item:
550-512
Manufacturer:
Sniper
Available:
In Stock
Your Price:
2240.41
EACH
WBO2 SENSOR, SNIPER TBI
Replacement Bosch Wideband Oxygen sensor for Sniper EFI and Terminator X systems.
Item#:
272-554-155
Manufacturer Item:
554-155
Manufacturer:
Sniper
Available:
In Stock
Your Price:
160.73
EACH
Sniper Hyperspark EFI Ignition
Do you need to upgrade your ignition system due to a recent Sniper EFI installation, but have no idea which option is best? Introducing HyperSpark Ignition, from Sniper EFI. The complete system consists of a CD Ignition Box, Billet distributor with Hall effect crank signal sensor, an ignition coil, and complete wiring harness ready to plug and play with your Sniper EFI System Features: Designed to work with Sniper EFI  Minimal wiring required. 135mJ of spark energy when used with the HyperSpark Ignition coil, ensures complete combustion HyperSpark CD Ignition box is seal and powder coated to be installed in the harshest of locations. External LED on Hyperspark CD Ignition box helps verify 12v, cranking RPM, and low battery voltage. Very low key off current (<150uA), so you can rest easy that your battery wont drain during storage periods.
Item#:
272-556-151
Manufacturer Item:
556-151
Manufacturer:
Sniper
Available:
In Stock
Your Price:
297.41
EACH
IGNITION COIL, HYPERSPARK
Do you need to upgrade your ignition system due to a recent Sniper EFI installation, but have no idea which option is best? Introducing HyperSpark Ignition, from Sniper EFI. The complete system consists of an ignition coil, CD ignition box, billet distributor with hall effect crank signal sensor, and complete wiring harness ready to plug and play with your Sniper EFI System. This high output ignition coil produces 135mJ of spark energy when used with the HyperSpark Ignition Box. The HyperSpark ignition coil comes self contained in it's own mounting bracket, with mounting hardware provided. Features: Designed to work with Sniper EFI  Plug and Play Ignition coil connector removes any doubt of loose connections at the Ignition Coil. Integrated Ignition Coil bracket simplifies mounting the ignition coil. 135mJ of spark energy when used with the HyperSpark Ignition Box, ensures complete combustion
Item#:
272-556-152
Manufacturer Item:
556-152
Manufacturer:
Sniper
Available:
In Stock
Your Price:
56.09
EACH
USB/CAN HARNESS, SNIPER TBI
The CAN to USB communication cable provides the user with real tuning time access to the ECU. This cable can be used with Holley EFI, Sniper EFI, and Terminator X Tuning Software. Which can be downloaded for free from the Support section of our website! Features: 8 communication cable for easy access to your ECU.
Item#:
272-558-443
Manufacturer Item:
558-443
Manufacturer:
Sniper
Available:
Out of Stock
Your Price:
79.81
EACH
1967-68 CHEVY CAMARO/FIREBIRD COATED STEEL EFI GAS
Holley and Sniper will help you to complete your EFI swap with our new EFI Conversion Fuel Tanks. Each tank is a direct fit for your application-no modifications necessary. The kit includes the tank, a 255 lph fuel pump, internal baffling, and a fuel level sender. The tank is powder coated for corrosion resistance and great looks. These tank kits are a complete solution for your EFI project! ***Steel filler neck that extends to rear valance is not included. You must use your existing stock filler neck or purchase one through restoration suppliers. Supports up to 550 EFI (@ 60 PSI at 13.5 Volts / 10.4 AMP Draw) Size is: 39-3/8" x 20-7/8" x 7-3/4" For a better seal use Permatex Indian Head Gasket Shellac Compound or Aviation Form-A-Gasket sealant on the gasket and screws.
Item#:
272-19-100
Manufacturer Item:
19-100
Manufacturer:
Sniper
Available:
Out of Stock
Your Price:
830.73
EACH
|◀ 1 - 12 of 437 ▶|
View: