Home  > NOS(x)
|◀ 1 - 12 of 986 ▶|
View:
NOS "Cheater" series Nitrous System, fits Holley 4150 and Carter AFB (late)
The NOS Cheater system uses large nitrous and fuel solenoids that can be adjusted for power levels up to 250 horsepower, in a matter of seconds. Cheater systems are easy to install and utilize a 1/2" thick injector plate which fits between the carburetor and intake manifold to provide ample hood clearance. These systems are available in both single-stage and dual-stage models. Dual-stage models are best suited to those applications where full power cannot be applied at once, due to traction limitations. However, even greater control can be realized by using an NOS Progressive Nitrous Controller, shown elsewhere in this catalog. Cheater systems include a 10 lb nitrous bottle, four (4) stages of jets, aircraft-quality steel braided lines and all necessary electrical and mounting hardware for a complete installation. Each single carburetor Cheater system includes Jet Pack #13725 that allows jetting to four (4) different horsepower levels: 150, 180, 210 and 250. Each multiple carburetor Cheater system includes Jet Pack #13735 that allows jetting to four (4) different horsepower levels: 150, 175, 200 and 250. Features: Large Nitrous and Fuel Solenoids Adjustable In a Matter Of Seconds Easy To Install Thin 1/2" Injector Plate Gives Ample Hood Clearance Includes Necessary Electrical Hardware
Item#:
401-02001
Manufacturer Item:
02001NOS
Manufacturer:
NOS
Available:
In Stock
Your Price:
1000.43
EACH
Adjustable From 100-150 horsepower 4150 Plate Kit. Includes 10 lb Sniper Or
The engineers at NOS have hit a bullseye by designing the finest entry-level nitrous system available today with the NOS Sniper kit. The Sniper is the economical "entry-level" kit from NOS that simply blows away competitive kits. The Sniper was developed to introduce enthusiasts to the use of nitrous at a very affordable price. This system is a safe and reliable street/strip system that fits popular 4 bbl. applications The Sniper is a fully adjustable system that is designed to provide from 100-150 extra horsepower in popular 4 bbl square bore or spread bore applications. However, you can get more than you expected; in dyno tests conducted by Chevy High Performance magazine the Sniper system produced an extra 163 horsepower when installed on a 355 CID small block Chevy with torque increased by an astounding 195 lb/ft. Sniper kits come race ready, right out of the box with all necessary components, including a distinctive bright orange 10 lb bottle with the industry standard industrial valve, adjustable plate with 100-150HP jets, solenoids, plus all required lines, hoses, fittings, clamps and detailed instruction sheet to make installation simple. Features: Very Affordable Price Safe And Reliable Fully Adjustable System Comes Race Ready All Necessary Components Included Simple Installation
Item#:
401-07001
Manufacturer Item:
07001NOS
Manufacturer:
NOS
Available:
In Stock
Your Price:
688.36
EACH
8 Pack of Fogger2 Nozzles, Standard
8-Pack of Fogger2 Nozzles, Standard - The original, patented NOS Fogger nozzle revolutionized the way nitrous oxide and fuel were dispersed into an engine. And to this day, there's nothing better than it for a variety of applications. However, as engine displacements got bigger, cylinder head designs got better and camshafts technology advanced, it became evident that greater precision was needed and NOS developed the Fogger2 nozzle. Its unique flow design provide superior atomization of supplemental fuel as well as more even fuel distribution within the nitrous flow than other nozzles. Changing power levels takes only seconds and is simply a matter of changing the fuel and nitrous jets on the nozzle. Both the original Fogger and Fogger2 nozzles are made from brass and have a black finish. They feature an etched NOS logo and tags for fuel and N20 identification during installation or jet changes. Note: For alcohol applications, please call our Technical Support Department at 270-781-9741 Features: Fully Adjustable Simple Jet Change Feature Injection At 90° Angle Fixed Metering Orifice Brass w/ Black Finish Fuel & NOS identified on Nozzle 8-Pack
Item#:
401-13700
Manufacturer Item:
13700NOS
Manufacturer:
NOS
Available:
In Stock
Your Price:
69.33
EACH
NOS Stainless Steel Flare Jet Package Of 6 Includes 1 Each Of Sizes 47, 53,
Super Powershot Precision SS Nitrous Flare Jet Package Of 6 Includes 1 Each Of Sizes 47, 53, 55, 61, 63, & 71 . NOS worked with experts in precision hole drilling to develop a proprietary manufacturing process for our new Precision SS jets during years of exhaustive research and development. The result significantly raises the bar in terms of jet accuracy and precision and renders all the competition's jets obsolete. Features: Nitrous Flare Jet Pack
Item#:
401-13721
Manufacturer Item:
13721NOS
Manufacturer:
NOS
Available:
Out of Stock
Your Price:
46.02
EACH
Standard Replacement 10 & 15 lb Bottle Bracket New Style 7" Dia. Steel
NOS brackets are designed to securely hold your nitrous bottle at the proper angle for maximum flow through the siphon tube. Standard brackets available made of steel with black vinyl coating, or Nylon. Quick-release aluminum models also available. Features: Securely Holds Nitrous Bottle Proper Angle for Maximum Flow
Item#:
401-14125
Manufacturer Item:
14125NOS
Manufacturer:
NOS
Available:
Out of Stock
Your Price:
93.52
EACH
Nitrous Bottle Heater for 10 & 15 lb Bottles 12 Volt DC w/ Thermostat
NOS systems are calibrated for optimum performance with a bottle pressure of 900- 950 psi. The pressure will change with temperature. Heater kits are thermostatically controlled (except P/N 14169NOS, which is pressure controlled) to keep the bottle at correct pressure. Kits available for the most popular-sized bottles, with both 12-volt and 110-volt heaters offered. Features: Provides Correct Pressure Thermostatically Controlled Bottle Pressure Of 900-950 PSI Calibrated For Optimal Performance Available for Most Popular-Sized Bottles 240 watt Heating Element
Item#:
401-14164
Manufacturer Item:
14164NOS
Manufacturer:
NOS
Available:
In Stock
Your Price:
277.18
EACH
10 lb Nitrous Bottle w/ NOS Blue Finish & Super Hi Flo Valve
Includes Bottle w/ Super Hi-Flo Valve Features: For Optimum Weight Reduction Distinctive Electric Blue Finish DOT-Approved Dimensions: 21" Tall x 7" Diameter Includes Nitrous Pressure Gauge
Item#:
401-14745
Manufacturer Item:
14745NOS
Manufacturer:
NOS
Available:
Out of Stock
Your Price:
373.61
EACH
Stainless Steel Braided Hoses
-4AN 3-foot Blue Please see catalog page for different lengths. - NOS premium grade stainless steel braided hoses come with -3, -4, -6 and -8 AN fittings (including step-ups) in virtually any length. They are all PTFE lined to withstand high pressures and provide high flow with a stainless steel outer covering for strength and resistance to abrasion. All NOS lines are configured for a superior flow to strength ratio. The AN fittings are color coded for identification: blue (for nitrous) or red (for fuel). Features: Come w/AN Fittings & Step-Ups Come In Virtually Any Length PTFE Lined For Strength Stainless Steel Outer Covering Resistance To Abrasion Superior Flow To Strength Ratio AN Fittings Color Coded
Item#:
401-15240
Manufacturer Item:
15240NOS
Manufacturer:
NOS
Available:
In Stock
Your Price:
51.58
EACH
Mini 2-Stage Progressive Nitrous Controller
Nitrous Oxide Systems is proud to announce their new Mini 2 Stage Progressive nitrous controller. Featuring two completely independent stages of nitrous control, each with its own throttle position activation switch and progressive ramps. It allows you to get the most out of your nitrous system and put more power to the ground when traction is at its best. RPM on/off control eliminates the need for a window switch and allows you to turn the nitrous off and on at set points. It also features two programmable outputs, so you can control timing retard or other devices. With the hand held programmer, it makes programming quick and simple and allows you to mount the main box out of site. Features: 2 fully independent nitrous controllers in one small bullet-proof case Hand held programmer for ease in programming Allows you to mount the main box out of sight Integrated throttle position activation switch eliminates the need for a separate WOT switch Progressive nitrous ramps feature: a) Delay time programmable from 0 to 9.9 sec. b) Start percentage programmable from 0 to 99% c) Ramp time programmable from 0 to 9.9 sec d) End percentage programmable from 0 to 99%, e)Nitrous can be programmed to ramp up or down RPM on/off control eliminates the need for a separate window switch Solenoid control channels with a 40 amp load capacity for large solenoids Two output signals for use with timing retards or activation switches
Item#:
401-15974
Manufacturer Item:
15974NOS
Manufacturer:
NOS
Available:
Out of Stock
Your Price:
426.70
EACH
2 Stage WOT/RPM Activated Window Switch
Tired of having to replace RPM pills every time you want to change the activation RPM of your nitrous kit? How About needing two RPM activated window switches to control your 2 stages of nitrous? Well, your worries and woes are over. Nitrous Oxide Systems is proud to present our 2 Stage Wide Open Throttle/ RPM activated Window Switch with Shift Light Control. The WOT/RPM activated window switch is a small, compact, user friendly unit with features like, 2 fully programmable independent RPM window switches that can operate from 0 to 20,000 RPM for anything from a low rpm engine to a high revving sport bike. It has the capability to read a rising or falling throttle position sensor for accurate activations every time. The WOT/RPM activated window switch also features a programmable output to activate a shift light for on-time gear pounding shifts and a handy recall feature that shows max RPM and TPS voltage for easy set-up. Also comes in the 02121NOS, 05134NOS, and 05135NOS kits. Window switches have just been taken to the next level! Features: Small, compact, user friendly unit with bright easy to read display 2 Fully programmable RPM window switches for easy adjustments without the need for RPM pills Window switch off and on RPM can be programmed from 0 to 9,999 RPM in 1 RPM increments for precise control (Reading is x10 for applications over 9,999 RPM) Works with any 4-cycle engine from 1 to 12 Cylinders RPM input can be connected to a DIS coil driver wire or a tachometer output circuit Will read from 0 to 20,000 RPM for use on a low RPM engine to high revving sport bikes Can read a rising or falling TPS signal for a wide range of applications and precise activations TPS trigger voltage is adjustable from 0 to 5.0 volts in 1 tenth increment. Perfect for a Drive-By-Wire vehicle that has no throttle cable to mount a traditional activation switch Window switches work independent of TPS so the window switch is at home just as much on a carbureted vehicle as it is on a EFI car Shift light control is adjustable from 0 to 9,999 RPM for on-time gear pounding shifts every time Live RPM and TPS readings are displayed on the bright, easy-to-see display Handy recall feature allows the max RPM and TPS voltage to be viewed after a run Bright colored LEDs light up when stages are active for easy verification of activation Replaces P/N 15879NOS RPM Switch Included in popular NOS Drive-By-Wire nitrous kits Can also be used to activate other accessories, not just nitrous Priced attractively as compared to traditional switches
Item#:
401-15982
Manufacturer Item:
15982NOS
Manufacturer:
NOS
Available:
In Stock
Your Price:
263.78
EACH
Nitrous Tube Bending Tool, Used with 1/8" or 3/16" Tubing
Nitrous Tube Bending Tool, Used with 1/8" or 3/16" Tubing - This special tube bending tool is designed for tight radius bends and will greatly simplify tube bending with very professional looking results. Excellent for use on any direct port type NOS kit, such as the Sportsman Fogger or the Pro Shot Fogger systems. Designed for use with 1/8" or 3/16" tubing. Features: For Tight Radius Bends Simplifies Tube Bending Professional Looking Results For Use w/ 1/8" or 3/16" Tubing
Item#:
401-15991
Manufacturer Item:
15991NOS
Manufacturer:
NOS
Available:
In Stock
Your Price:
41.32
EACH
Nitrous Bottle Purge Valve for -4AN Line
The primary purpose of a purge valve is to release trapped air or gaseous nitrous from feed line(s). Helps to ensure consistent performances. And it looks cool, too. You've probably seen the Import or Pro Mod guys do it. Includes all required components. Features: Release Trapped Air In Feed Lines Ensures Consistent Performance Includes All Required Components
Item#:
401-16030
Manufacturer Item:
16030NOS
Manufacturer:
NOS
Available:
Out of Stock
Your Price:
227.62
EACH
|◀ 1 - 12 of 986 ▶|
View: