Home  > Koul AN(x)  > (x)
View:
Koul Tools AN Hose Assembly Tool -10
AN Hose Assembly Tool Single -10 / Part # -10 Since the invention of braided, stainless steel hose, racers and mechanics have been struggling to install it into the socket part of the AN hose assembly. If you're lucky and get a clean cut on the hose end, you might get it in. Most of the time the hose end is a bit fuzzy and the battle begins. It is not only time consuming, it can get bloody as well. The AN Hose Assembly Tool fills a need that was long overdue. Just insert the socket into the capsule of the hose assembly tool, twist in the hose, and the assembly is complete in less than ten seconds. There's no need to worry about wear or tear. This tool is made of a high-tech composite and is virtually indestructible. You can even repeat this process several times without re-cutting this hose end. You'll be amazed at the amount of time you save and pain you avoid by using this tool. Gone are the days of stabbing your fingers with frayed hose ends and scrapping AN hose because it was cut too short. The money you save from buying band-aids alone will pay for the tool. Installs braided, stainless steel hose into AN fittings. Works with nylon, braided AN hose. Includes spacers and sleeves for different sized sockets. * Does not work with PTFE fittings.
Item#:
344--10
Manufacturer Item:
-10
Manufacturer:
Koul AN
Available:
Out of Stock
Your Price:
41.95
EACH
Koul Tools Large AN Hose Assembly Tool kit
AN Hose Assembly Tool Sizes -10, -12, -16 / Part # 1016 Large Kit Installs sizes -10,-12,-16 AN hose. Includes spacers and sleeves for different sized sockets. All -16s (excepts Russell's brand) use the sleeve and a rear spacer. Most -10s and -12s will use a spacer. See the instructions in the case for the proper spacer number. Since the invention of braided, stainless steel hose, racers and mechanics have been struggling to install it into the socket part of the AN hose assembly. If you're lucky and get a clean cut on the hose end, you might get it in. Most of the time the hose end is a bit fuzzy and the battle begins. It is not only time consuming, it can get bloody as well. The AN Hose Assembly Tool fills a need that was long overdue. Just insert the socket into the capsule of the hose assembly tool, twist in the hose, and the assembly is complete in less than ten seconds. There's no need to worry about wear or tear. This tool is made of a high-tech composite and is virtually indestructible. You can even repeat this process several times without re-cutting this hose end. You'll be amazed at the amount of time you save and pain you avoid by using this tool. Gone are the days of stabbing your fingers with frayed hose ends and scrapping AN hose because it was cut too short. The money you save from buying band-aids alone will pay for the tool. Installs braided, stainless steel hose into AN fittings. Works with nylon, braided AN hose. Includes spacers and sleeves for different sized sockets. * Does not work with PTFE fittings.
Item#:
344-1016
Manufacturer Item:
1016
Manufacturer:
Koul AN
Available:
In Stock
Your Price:
89.97
EACH
Koul Tools Pro Combo AN Hose Assembly Tool kit
AN Hose Assembly Tool Sizes -4 to -16 / Part # 416 Pro Combo Kit Installs sizes -4,-6,-8,-10,-12,-16 AN hose. Includes all the spacers and sleeves from the Small and Large kits Since the invention of braided, stainless steel hose, racers and mechanics have been struggling to install it into the socket part of the AN hose assembly. If you're lucky and get a clean cut on the hose end, you might get it in. Most of the time the hose end is a bit fuzzy and the battle begins. It is not only time consuming, it can get bloody as well. The AN Hose Assembly Tool fills a need that was long overdue. Just insert the socket into the capsule of the hose assembly tool, twist in the hose, and the assembly is complete in less than ten seconds. There's no need to worry about wear or tear. This tool is made of a high-tech composite and is virtually indestructible. You can even repeat this process several times without re-cutting this hose end. You'll be amazed at the amount of time you save and pain you avoid by using this tool. Gone are the days of stabbing your fingers with frayed hose ends and scrapping AN hose because it was cut too short. The money you save from buying band-aids alone will pay for the tool.
Item#:
344-416
Manufacturer Item:
416
Manufacturer:
Koul AN
Available:
In Stock
Your Price:
139.97
EACH
Koul Tools Small AN Hose Assembly Tool kit
AN Hose Assembly Tool Sizes -4, -6, -8 / Part # 468 Small Kit Installs sizes -4,-6,-8 AN hose. Includes sleeve for -4 Russell fitting. Installs braided, stainless steel hose into AN fittings. Works with nylon, braided AN hose. Includes spacers and sleeves for different sized sockets. * Does not work with PTFE fittings. Since the invention of braided, stainless steel hose, racers and mechanics have been struggling to install it into the socket part of the AN hose assembly. If you're lucky and get a clean cut on the hose end, you might get it in. Most of the time the hose end is a bit fuzzy and the battle begins. It is not only time consuming, it can get bloody as well. The AN Hose Assembly Tool fills a need that was long overdue. Just insert the socket into the capsule of the hose assembly tool, twist in the hose, and the assembly is complete in less than ten seconds. There's no need to worry about wear or tear. This tool is made of a high-tech composite and is virtually indestructible. You can even repeat this process several times without re-cutting this hose end. You'll be amazed at the amount of time you save and pain you avoid by using this tool. Gone are the days of stabbing your fingers with frayed hose ends and scrapping AN hose because it was cut too short. The money you save from buying band-aids alone will pay for the tool.
Item#:
344-468
Manufacturer Item:
468
Manufacturer:
Koul AN
Available:
In Stock
Your Price:
103.90
EACH
Koul Tools AN Hose Assembly Tool -6
AN Hose Assembly Tool Single -6 / Part # -6 Since the invention of braided, stainless steel hose, racers and mechanics have been struggling to install it into the socket part of the AN hose assembly. If you're lucky and get a clean cut on the hose end, you might get it in. Most of the time the hose end is a bit fuzzy and the battle begins. It is not only time consuming, it can get bloody as well. The AN Hose Assembly Tool fills a need that was long overdue. Just insert the socket into the capsule of the hose assembly tool, twist in the hose, and the assembly is complete in less than ten seconds. There's no need to worry about wear or tear. This tool is made of a high-tech composite and is virtually indestructible. You can even repeat this process several times without re-cutting this hose end. You'll be amazed at the amount of time you save and pain you avoid by using this tool. Gone are the days of stabbing your fingers with frayed hose ends and scrapping AN hose because it was cut too short. The money you save from buying band-aids alone will pay for the tool. Installs braided, stainless steel hose into AN fittings. Works with nylon, braided AN hose. Includes spacers and sleeves for different sized sockets. * Does not work with PTFE fittings.
Item#:
344--6
Manufacturer Item:
-6
Manufacturer:
Koul AN
Available:
Out of Stock
Your Price:
41.95
EACH
Koul Tools Hot Rod AN Hose Assembly Tool kit
AN Hose Assembly Tool Sizes -6, -8, -10 / Part # 681 Hot Rod Kit Installs sizes -6,-8,-10, AN hose. Includes spacers and sleeves for different sized sockets. Spacers are used for some -6s, -8s, and most -10s. See the instructions in the case for the proper spacer number. Installs braided, stainless steel hose into AN fittings. Works with nylon, braided AN hose. Includes spacers and sleeves for different sized sockets. * Does not work with PTFE fittings. Since the invention of braided, stainless steel hose, racers and mechanics have been struggling to install it into the socket part of the AN hose assembly. If you're lucky and get a clean cut on the hose end, you might get it in. Most of the time the hose end is a bit fuzzy and the battle begins. It is not only time consuming, it can get bloody as well. The AN Hose Assembly Tool fills a need that was long overdue. Just insert the socket into the capsule of the hose assembly tool, twist in the hose, and the assembly is complete in less than ten seconds. There's no need to worry about wear or tear. This tool is made of a high-tech composite and is virtually indestructible. You can even repeat this process several times without re-cutting this hose end. You'll be amazed at the amount of time you save and pain you avoid by using this tool. Gone are the days of stabbing your fingers with frayed hose ends and scrapping AN hose because it was cut too short. The money you save from buying band-aids alone will pay for the tool.
Item#:
344-681
Manufacturer Item:
681
Manufacturer:
Koul AN
Available:
In Stock
Your Price:
110.89
EACH
Koul Tools AN Hose Assembly Tool -8
AN Hose Assembly Tool Single -8 / Part # -8 Since the invention of braided, stainless steel hose, racers and mechanics have been struggling to install it into the socket part of the AN hose assembly. If you're lucky and get a clean cut on the hose end, you might get it in. Most of the time the hose end is a bit fuzzy and the battle begins. It is not only time consuming, it can get bloody as well. The AN Hose Assembly Tool fills a need that was long overdue. Just insert the socket into the capsule of the hose assembly tool, twist in the hose, and the assembly is complete in less than ten seconds. There's no need to worry about wear or tear. This tool is made of a high-tech composite and is virtually indestructible. You can even repeat this process several times without re-cutting this hose end. You'll be amazed at the amount of time you save and pain you avoid by using this tool. Gone are the days of stabbing your fingers with frayed hose ends and scrapping AN hose because it was cut too short. The money you save from buying band-aids alone will pay for the tool. Installs braided, stainless steel hose into AN fittings. Works with nylon, braided AN hose. Includes spacers and sleeves for different sized sockets. * Does not work with PTFE fittings.
Item#:
344--8
Manufacturer Item:
-8
Manufacturer:
Koul AN
Available:
Out of Stock
Your Price:
41.95
EACH
View: