Home  > Edelbrock(x)
|◀ 1 - 12 of 2501 ▶|
View:
Pro-Flo 1000 Series Chrome Air Cleaner with Foam Element with 5-1/8" Air Ho
Pro-Flo 1000 Series, with the popular reusable air filter, offers superior flow capacity, low profile, good filtration, performance benefits and long-term savings. Pro-Flo 1000 is an economical and effective way to keep clean air feeding your engine without the expense of a new filter every few thousand miles. Inside every Edelbrock Pro-Flo 1000 Series, you'll find our exclusive reticulated urethane foam element. Maintaining Pro-Flo's foam element is simple. Just release the spring clip, remove the element, wash in hot, soapy water. Rinse, dry and reassemble. Should you need to replace your foam element, replacement element (#1099) is available. For superior flow capacity, performance and economy, choose Pro-Flo 1000 Series reusable air filters.
Item#:
212-1002
Manufacturer Item:
1002
Manufacturer:
Edelbrock
Available:
In Stock
Your Price:
31.78
EACH
Pro-Flo 1000 Series Black Air Cleaner & Foam Element for 4-bbl Carb - 5-1/8
Pro-Flo 1000 Series, with the popular reusable air filter, offers superior flow capacity, low profile, good filtration, performance benefits and long-term savings. Pro-Flo 1000 is an economical and effective way to keep clean air feeding your engine without the expense of a new filter every few thousand miles. Inside every Edelbrock Pro-Flo 1000 Series, you'll find our exclusive reticulated urethane foam element. Maintaining Pro-Flo's foam element is simple. Just release the spring clip, remove the element, wash in hot, soapy water. Rinse, dry and reassemble. Should you need to replace your foam element, replacement element (#1099) is available. For superior flow capacity, performance and economy, choose Pro-Flo 1000 Series reusable air filters.
Item#:
212-10023
Manufacturer Item:
10023
Manufacturer:
Edelbrock
Available:
In Stock
Your Price:
33.05
EACH
Airhorn Gasket Set (5 Pieces)
Edelbrock performer EPS carburetor main lid airhorn gasket. 5 Gaskets included
Item#:
212-1499
Manufacturer Item:
1499
Manufacturer:
Edelbrock
Available:
In Stock
Your Price:
24.13
EACH
Thunder Series AVS 650 CFM Off-Road Carb with Electric Choke in Satin (non-
This item has been discontinued and replaced by item 
The Edelbrock 1826/18269 Thunder Series AVS 650 CFM electric choke carburetor has been designed and calibrated to deliver optimum off-road performance. Several characteristics make the 1826 Thunder Series AVS 650 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to hold a tune, so once it is tuned, the carburetor stay's tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The third characteristic is the primary and secondary booster clusters that are utilized offer the most accurate and up-to-date calibration available for todays fuels and octane levels. Fourth the unique Thunder Series Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit with simple hand tools while on your vehicle. Its quick. Its simple. Its effective. It can be easily adjusted - in seconds - to suit your application... no extra parts required to achieve optimum performance. (CALIBRATED FOR OFF-ROAD PERFORMANCE) Designed and calibrated for optimum off-road performance in small-block and some big-block engines. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, Performer RPM, RPM Air-Gap or other brands of similar design. Includes spring-loaded needles and seats for superior fuel control in off-road terrain. Includes: Metering Jets - Primary .095, Secondary .098; Metering Rods - .065 x .047; Step-Up Spring - Orange (5 Hg). Use Carb Studs #8008 or #8024 if needed.
Item#:
212-1826
Manufacturer Item:
1826
Manufacturer:
Edelbrock
Available:
Out of Stock
Your Price:
570.48
EACH
This item is discontinued
AVS2 Carburetor 800 CFM With Manual Choke, Satin Finish (Non-EGR)
Edelbrocks Annular Flow Booster technology brings superior fuel atomization to all high-horsepower small- and big-block engines with the AVS2 800 CFM Manual Choke Carburetor #1912 that is specially calibrated to make power. Annular Flow Boosters deliver near EFI-like drivability that you can feel as soon as you step on the gas. Fuel distribution is refined by eight equally spaced orifices in the booster rings that replace down-leg boosters which simply dump raw fuel into the venturi. Flat spots are completely eliminated, and throttle response in the low- to mid-RPM range is improved tremendously without sacrificing that top-end power that Edelbrock is known for. The AVS2 is unaffected by engine backfires since there are no power valves to blow out. For fast and simple part-throttle tuning, metering rods and springs can be changed in seconds without carburetor removal or fuel draining. AVS2 carbs have the unique ability to "hold a tune when compared to other carburetors. Your tuning and adjustments stay unchanged, so performance remains consistent. Updated primary and secondary booster clusters in the AVS2 offer the most accurate and up-to-date calibration available for today's fuels and octane levels. Additionally, the unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit. Adjustments can be with simple hand tools in seconds to suit your application. The AVS2 features a two-piece ease-of-tuning design that lets you make float level adjustments or replace internal components without draining the fuel from the carburetor or removing it from the engine. The AVS2 800 CFM #1912 comes with a manual (#1912) or electric (#1913) choke in satin or chrome-like EnduraShine finish. All AVS2 Series carburetors, like Edelbrocks popular Performer Series and Thunder Series AVS, are designed, manufactured, assembled and calibrated by Edelbrock in the USA.
Item#:
212-1912
Manufacturer Item:
1912
Manufacturer:
Edelbrock
Available:
In Stock
Your Price:
476.24
EACH
AVS2 Off-Road Carburetor 650 CFM W/ Manual Choke, Satin Finish (Non-EGR)
The Edelbrock AVS2 Off-Road Carburetor #1915 with Manual Choke is a special 650 CFM version of the proven #1905 street carb with Annular Flow Booster technology for near-EFI-like drivability that you can feel as soon as you step on the gas. Like AVS2 street carbs, the AVS2 Off-Road features an annular ring with eight orifices that replaces the standard single brass tube (down-leg) fuel feed. The AVS2 Off-Road booster ring distributes fuel into the airflow stream with an even spray that eliminates flat spots and greatly improves throttle response in the low- to mid-RPM range without sacrificing top-end power.For superior fuel control over rough terrain, the AVS2 Off-Road features a new spring-loaded needle and seat along with a spring-loaded anti-syphon ball in the accelerator pump circuit to prevent fuel drip common with standard carbs in off-road situations.The AVS2 Off-Road is unaffected by engine backfires since there are no power valves to blow out. For fast and simple part-throttle tuning, metering rods and springs can be changed in seconds without carburetor removal or fuel draining. AVS2 Off-Road carbs have the unique ability to "hold a tune when compared to other carburetors. Your tuning and adjustments stay unchanged, so performance remains consistent. Updated primary and secondary booster clusters in the AVS2 Off-Road offer the most accurate and up-to-date calibration available for today's fuels and octane levels. Additionally, the unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit. Adjustments can be with simple hand tools in seconds to suit your application.AVS2 Off-Road Carburetors feature a two-piece design for easy tuning that allows you to make float level adjustments or replace internal components without draining the carburetor or removing it from the engine. The AVS2 Off-Road 650 CFM is available with a manual (#1915) or electric (#1916) choke and is manufactured by Edelbrock in the USA.
Item#:
212-1915
Manufacturer Item:
1915
Manufacturer:
Edelbrock
Available:
In Stock
Your Price:
501.70
EACH
AVS2 Off-Road Carburetor 650 CFM W/ Electric Choke, Satin Finish (Non-EGR)
Edelbrock's AVS2 Off-Road Carburetor #1916 with Electric Choke is a special 650 CFM version of the proven #1906 street carb with Annular Flow Booster technology for near-EFI-like drivability that you can feel as soon as you step on the gas. Like AVS2 street carbs, the AVS2 Off-Road features an annular ring with eight evenly spaced orifices that replaces the standard single brass tube (down-leg) fuel feed. The AVS2 Off-Road booster ring distributes fuel into the airflow stream with an even spray that eliminates flat spots and greatly improves throttle response in the low-to mid-RPM range without sacrificing top-end power. For superior fuel control over rough terrain, the AVS2 Off-Road features a new spring-loaded needle and seat along with a spring-loaded anti-syphon ball in the accelerator pump circuit to prevent fuel drip common with standard carbs in off-road situations. The AVS2 Off-Road is unaffected by engine backfires since there are no power valves to blow out. For fast and simple part-throttle tuning, metering rods and springs can be changed in seconds without carburetor removal or fuel draining. AVS2 Off-Road carbs have the unique ability to hold a tune when compared to other carburetors. Your tuning and adjustments stay unchanged, so performance remains consistent. Updated primary and secondary booster clusters in the AVS2 Off-Road offer the most accurate and up-to-date calibration available for today's fuels and octane levels. Additionally, the unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit. Adjustments can be with simple hand tools in seconds to suit your application. AVS2 Off-Road Carburetors feature a two-piece design for easy tuning that allows you to make float level adjustments or replace internal components without draining the carburetor or removing it from the engine. The AVS2 Off-Road 650 CFM is available with a manual (#1915) or electric (#1916) choke and are manufactured by Edelbrock in the USA
Item#:
212-1916
Manufacturer Item:
1916
Manufacturer:
Edelbrock
Available:
In Stock
Your Price:
540.73
EACH
Performer-Plus Camshaft Kit for Big-Block Chevy 396-427-454 V8
Designed for optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. These popular Performer-Plus camshafts for Small-Block Chevy are 50-state street legal.
Item#:
212-2162
Manufacturer Item:
2162
Manufacturer:
Edelbrock
Available:
In Stock
Your Price:
278.84
EACH
MANIFOLD PERFORMER OLDS 350 NON-EGR
Performer Olds 350 Intake Manifold is designed for street 307-330-350-403 c.i.d. Oldsmobile V8s, 1966-85. For non-EGR, the new number 2711 manifold comes with a universal pad to fit most carburetors with electric chokes.
Item#:
212-2711
Manufacturer Item:
2711
Manufacturer:
Edelbrock
Available:
In Stock
Your Price:
516.99
EACH
Pro-Flo 4 EFI Traditional 4150-Style Kit For 1986 & Earlier Chevy SB
The Edelbrock part # 35760 Pro-Flo 4 EFI System for 1986 & Earlier Small-Block Chevy engines is equipped with the latest technology and features. The EFI system comes complete with a traditional 4150-Style satin finish single plane intake manifold and 29 Lb/Hr injectors capable of 450 HP with 58 p.s.i. fuel pressure. Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA fully terminated high-quality harness with clearly labeled connections to ensure a hassle-free installation. The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and measures half the depth of the previous ECU. It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection. We've added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for. The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations. The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU's self-learning capability to continually adjust the calibration to get maximum performance. E-Tuner 4 features a simple and easy to use setup wizard to help you get started. Best of all, the E-Tuner 4 app is free and can be downloaded from the Google Play Store, allowing you to use your personal Android based smart phone or tablet. If you don't have a compatible device, then we also offer kits that include a 7" Android tablet with the E-Tuner 4 app pre-installed. Multiple dash displays are included to allow you to monitor engine vitals from your Android smart phone or tablet. Pro-Flo 4 does not require laptop tuning.
Item#:
212-35760
Manufacturer Item:
35760
Manufacturer:
Edelbrock
Available:
Out of Stock
Your Price:
2414.56
EACH
Pro-Flo 4 EFI Traditional 4150-Style Kit For 1986 & Earlier Chevy SB
The Edelbrock part # 35770 Pro-Flo 4 EFI System for 1986 & Earlier Small-Block Chevy engines is equipped with the latest in technology and features. The EFI system comes complete with a traditional 4150-Style satin finish single plane intake manifold and 35 Lb/Hr injectors capable of 550 HP. with 58 p.s.i. fuel pressure. Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA fully terminated high-quality harness with clearly labeled connections to ensure a hassle-free installation. The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and measures half the depth of the previous ECU. It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection. We've added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for. The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations. The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU's self-learning capability to continually adjust the calibration to get maximum performance. E-Tuner 4 features a simple and easy to use setup wizard to help you get started. Best of all, the E-Tuner 4 app is free and can be downloaded from the Google Play Store, allowing you to use your personal Android based smart phone or tablet. If you don't have a compatible device, then we also offer kits that include a 7" Android tablet with the E-Tuner 4 app pre-installed. Multiple dash displays are included to allow you to monitor engine vitals with an Android smart phone or tablet. Pro-Flo 4 does not require laptop tuning.
Item#:
212-35770
Manufacturer Item:
35770
Manufacturer:
Edelbrock
Available:
Out of Stock
Your Price:
2541.91
EACH
Pro-Flo 4 EFI Traditional 4150-Style For Chevy SB w/Vortec/E-Tec Heads
The Edelbrock Pro-Flo 4 EFI Kit #35780 for the Small-Block Chevy engine with Vortec/E-Tec cylinder heads is a fully sequential multi-port injection system designed with a fuel injector strategically positioned in each runner of the intake manifold to deliver the best fuel atomization and most even distribution to each cylinder. This system features the high-performance Victor-style single-plane intake manifold that comes preassembled with high-flow 29 lb/hr injectors, fuel rails and 4150-flange throttle body. The Pro-Flo 4 EFI #35780 is compatible with factory-style cylinder heads or Edelbrock Performer and Performer RPM Cylinder heads. Also included is a distributor designed to work specifically with Pro-Flo 4 providing fully sequential port injection and infinite control over ignition and fuel events. This system is rated for 450 horsepower at 58 PSI with all supporting sensors, ECU, wire harnesses and 7-inch Android tablet for a streamlined installation. Key Pro-Flo 4 features are Self-Learning Fuel Map Technology, Wide-Band O2 Closed Loop Mixture Control and an ECU with advanced processor technology and Bluetooth connectivity. E-Tuner Android Software includes a Setup Wizard to simplify installation and provides fuel and spark adjustability for complete control over the system. Pro-Flo 4 EFI requires no laptop tuning. Minimal setup and tuning adjustments are required with base calibrations provided in the software. The ECU is self-learning and will continually adjust the fuel injection calibration for maximum performance by maintaining a specified target air-fuel ratio as you drive. The E-Tuner Software provides the ability to fine-tune air-fuel ratios, ignition curve, idle speed, acceleration fuel, fans, rev-limiter and more. Multiple displays let you monitor engine performance in real-time from inside or outside of the vehicle while retaining the simplicity that Pro-Flo 4 systems are known for.
Item#:
212-35780
Manufacturer Item:
35780
Manufacturer:
Edelbrock
Available:
Out of Stock
Your Price:
2541.91
EACH
|◀ 1 - 12 of 2501 ▶|
View: