Using carefully selected resistors and a Zobel Network, the AC-LGD has been designed to generate load and stabilize signal from the factory system to ensure the best possible audio. The LGDs come in pairs and can be easily connected to your AudioControl Factory System Upgrade product with the pre-wired connectors.

ACM series amplifiers by AudioControl are the perfect blend of power and features for car audio systems from mild to wild. Compact size, high power and the ability to help integrate with factory stereo systems are features that assure Making Good Sound Great can happen in any installation. Reversible cover plates allow flexible mounting options when paired with AudioControl DM Series Processors or when using multiple ACM series amplifiers in confined spaces. Once again AudioControl comes to the rescue combining features and benefits needed to assure audio euphoria in an automotive setting. features 300 watts @ 2 ohms 175 watts @ 4 ohms AccuBASS® Processing GTOTM Signal Sense Active speaker-level inputs for OEM integration RCA Line Inputs Linkwitz-Riley Crossover Optional ACR-1 remote level control Reversible Cover Plate Bulletproof 5 year warranty (when installed by an authorized AudioControl dealer)

ACM series amplifiers by AudioControl are the perfect blend of power and features for car audio systems from mild to wild. Compact size, high power and the ability to help integrate with factory stereo systems are features that assure Making Good Sound Great can happen in any installation. Reversible cover plates allow flexible mounting options when paired with AudioControl DM Series Processors or when using multiple ACM series amplifiers in confined spaces. Once again AudioControl comes to the rescue combining features and benefits needed to assure audio euphoria in an automotive setting. features 2 x 150 watts @ 2 ohms 2 x 75 watts @ 4 ohms 300 watts @ 4 ohms bridged GTOTM Signal Sense Active speaker-level inputs for OEM integration RCA Line Inputs Linkwitz-Riley Crossover Reversible Cover Plate Bulletproof 5 year warranty (when installed by an authorized AudioControl dealer)

ACM series amplifiers by AudioControl are the perfect blend of power and features for car audio systems from mild to wild. Compact size, high power and the ability to help integrate with factory stereo systems are features that assure Making Good Sound Great can happen in any installation. Reversible cover plates allow flexible mounting options when paired with AudioControl DM Series Processors or when using multiple ACM series amplifiers in confined spaces. Once again AudioControl comes to the rescue combining features and benefits needed to assure audio euphoria in an automotive setting. features 4 x 75 watts @ 2 ohms 4 x 50 watts @ 4 ohms 150 watts @ 4 ohms bridged GTOTM Signal Sense Active speaker-level inputs for OEM integration RCA Line Inputs Linkwitz-Riley Crossover Reversible Cover Plate Bulletproof 5 year warranty (when installed by an authorized AudioControl dealer)

Add remote level control for your AudioControl processor or amplifier. This is the replacement remote for the Epicenter. Comes with a 20 foot cable and removable mounting enclosure (for custom dash installations). compatible with 6XS ACM-1.300 The Epicenter® Concert Series LC2i LC6i LC7i Overdrive Plus Matrix Plus LC-4.800 LC-6.1200 legacy products supported LC6 LC8 Original Epicenter® (bypass not supported)

Add remote level control for your AudioControl processor or amplifier. This is the replacement remote for the LC8i, DQ-61, DQDX and The Epicenter® Amplifiers. Comes with a 20 foot cable and removable mounting enclosure (for custom dash installations). compatible with LC8i D-4.800 D-6.1200 DM-608 DM-810 DQ-61 DQDX The Epicenter® Amplifiers

high-power 4 channel dsp matrix amplifier with accubass® AudioControl has paired our award winning amplifier technology with our powerful Matrix DSP into the D-4.800. This single-unit solution provides unprecedented power and tuning flexibility when you require audio perfection from your factory or aftermarket sound system. The D-4.800 features active speaker level inputs, line-level inputs and outputs plus, using AudioControls DM Smart DSP app gives you complete control over all features including 30 bands of equalization, signal delay, input delay, polarity and AudioControl proprietary features like AccuBASS®, GTOTM Signal Sense, and MILCTM plus integrated input and output RTAs. Perfect for OEM integration and aftermarket builds, the D-4.800 packs power and intelligent flexibility into one beautiful cast aluminum chassis. features Built-in DSP Configurable as 4/3/2 channel amplifier 4 x 200 watts @ 2 ohms 4 x 125 watts @ 4 ohms 400 watts @ 4 ohms bridged AccuBASS® Processing MILCTM Maximum Input Level Control (Patent Pending) GTOTM Signal Sense Active speaker-level inputs (6 channels) for OEM integration 4 preamp inputs 2 assignable preamp outputs Solid One-Piece Aluminum Chassis Input and Output RTA for precise and informed tuning Input and Output Delay 12 and 24 dB/octave Linkwitz-Riley crossovers 30 band equalizer Optional ACR-3 remote for preset recall and level control DM Smart DSP app available in downloads for Mac/PC or Connect your laptop to the D-4.800 using AudioControls DM Smart DSP app, a fully featured Matrix DSP Interface designed to give you instant and clear control over every aspect of your processor. Route any input to any output, adjust gain, delay and polarity then precisely tune the D-4.800 using a 30 band EQ. High-pass, low-pass and band-pass can be set up for any output using 12 or 24 dB/octave Linkwitz-Riley crossovers. For OEM integration, take advantage of the input and output RTAs, available for every input and output, to easily identify and sum factory speaker signals. With a clear GUI and intuitive workflow, AudioControls DM Smart DSP app will take the guesswork out of tuning your system to your exact specifications. specifications inputs Preamp Inputs: 4 balanced Preamp Input Voltage Range: 250 mV  8 V RMS Speaker Level Inputs: 6 outputs Rated Continuous (RMS) Power at 14.4V: 4   125 W x 4 RMS 2   200 W x 4 RMS Bridged 4   400 W RMS Preamp Outputs: 2 Maximum Preamp Output: 8.5 V RMS performance Frequency Response: 20 Hz  24 kHz Signal to Noise: 102 dBA, Ref 200 W @ 2 Ohm THD+N: < 0.1% Power / Ground Wire Gauge: 8 to 3 AWG wire Fuse Rating: 2 x 40 A weights & dimensions Dimensions: 9.0W x 8.0D x 2.1H Weight: 5.0 lbs. (2.3kg) in the box: D-4.800, Speaker Connectors, Fuses, Manual, Warranty

The powerful DM-608 processor allows users to truly optimize the performance of their audio system, regardless of whether they are using a factory or aftermarket source, and to truly achieve the goal of Making Good Sound Great. These highly versatile Digital Signal processors are equipped with key features, such as active speaker level inputs, line-level and digital audio inputs, providing up to 8 channels of output. AudioControls smart user interface contains the power of AudioControl processing through a flexible PC interface packed full of features in a simple lay out. Configure signal summing, 30 bands of equalization, signal time-alignment, input delay and phase correction, plus AudioControl proprietary features like AccuBASS®, GTOTM Signal Sense, and MILCTM as well as integrated input and output RTAs. The built in Option Port on the DM-608 is the future of car audio and will allow hi-res streaming directly into the DSP. It also opens up future proprietary connections for additional inputs, controllers and interface solutions. features Input and Output RTA for precise and informed tuning GTOTM Signal Sensing MILCTM Clip Detection AccuBASS® Signal Summing Signal Delay 12 and 24 dB/octave crossovers 30 band equalizer Optional ACR-3 remote for preset recall and level control Optional AC-BT24 Bluetooth Streamer/Programmer DM Smart DSP app available in downloads for Mac/PC or milctm The DM-810 features AudioControls MILCTM (Maximum Input Level Control) patent-pending source clip detection circuit. MILCTM calculates when the waveform of an incoming audio signal is clipping, and if it is, the LED will fulfill its prime objective and shine forth, aiding in precise level matching control. option port The built in Option Port on the DM-810 is the future of car audio and allows hi-res streaming and DSP programming directly into the DSP using the AC-BT24 Bluetooth Streamer/Programmer. It also opens up future proprietary connections for additional inputs, controllers and interface solutions. Watch this space for future Option Port expansion options. dm smart dsp Connect your laptop to the DM-608 using AudioControls DM Smart DSP app, a fully featured Matrix DSP Interface designed to give you instant and clear control over every aspect of your processor. Route any input to any output, adjust gain, delay and polarity then precisely tune the DM-608 using a 30 band EQ. High-pass, low-pass and band-pass can be set up for any output using 12 or 24 dB/octave Linkwitz-Riley crossovers. For OEM integration, take advantage of the input and output RTAs, available for every input and output, to easily identify and sum factory speaker signals. With a clear GUI and intuitive workflow, AudioControls DM Smart DSP will take the guesswork out of tuning your system to your exact specifications. specifications inputs Preamp Input Channels: 6 Digital Inputs: 1 x Toslink and Coax Input Impedance Preamp / Speaker-level: 20 k / 7 k outputs Preamp Outputs Channels: 8 Maximum Output Level: 10 Vrms Output Impedance: 150  performance Total Harmonic Distortion: 0.01% Frequency Response: 20 Hz to 24 kHz Crossover Frequency: variable Crossover Type: 12 and 24 dB/octave Linkwitz-Riley control 12 VDC Remote In 12 VDC Remote Out (always active when unit is on) general Power Supply: High Headroom PWM Switching Current Draw: 1A Recommended Fuse Rating: 3A weights & dimensions Dimensions: 9.4W x 5.7D x 1.6H Weight: 2.4lbs (1.1kg) in the box: DM-608, Power and Speaker Connectors, Manual, Warranty

When you demand the perfect blend of power and performance, AudioControl provides answers and the LC-1.800 is no exception. No matter the install, you can be assured power will meet and exceed expectations with 800 watts at 2 ohms. The mix of high level and low level inputs mean you have the widest input voltage range in the industry. AudioControls patented AccuBASS® circuit is the only way to properly overcome factory bass roll-off and heavily equalized factory bass settings. Enjoy loud, clean and articulate bass combined with the best warranty available with the LC-1.800 amplifier. features Subwoofer amplifier with patented AccuBASS® 800 watts @ 2 ohms 500 watts @ 4 ohms AccuBASS® Processing MILC Maximum Input Level Control (Patent Pending) GTO Signal Sense 24 dB/octave Linkwitz-Riley Alignment crossover Speaker level and preamp inputs Optional ACR-1 assignable remote control Solid One-Piece Aluminum Chassis specifications inputs Preamp Inputs: 2 balanced Input Voltage Range: 500 mV  6 Vrms outputs Rated Continuous (RMS) Power at 14.4V: 4   500 W RMS 2   800 W RMS performance Frequency Response: 10 Hz  30 kHz Signal to Noise: 102 dBa, Ref 500 W @ 4 Ohm Damping Factor: 670 at 10 V, 4 Ohm Output, 100 Hz THD+N: < 0.01% Minimum Power / Ground Wire Gauge: 3 AWG wire Fuse Rating: 2 x 40 A Crossover: 24 dB/octave Linkwitz-Riley, Adjustable From 30 Hz  230 Hz PFM Subsonic Filter: 24 Hz weights & dimensions Dimensions: 9W x 7.95D x 2.1H Weight: 5.0lbs (2.0kg) in the box: LC-1.800, Speaker connectors, Fuses, Manual, Warranty

The LC2i, is a compact, two-channel processor with active input circuitry, which allows it to accept speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers. It converts them to high-quality pre-amp signals that can then be directed to after-market processors and/or amplifiers. Users can enjoy maximum sound quality while maintaining the use of factory volume and steering wheel controls. features Two channels of Active speaker level inputs  Accept 400 watt signals per channel Fixed and variable outputs with discrete level controls AccuBASS® processing for correction of bass roll-off GTOTM Signal Sensing Input For Optional Remote Level Control Compact design

Product Overview The AudioControl LC2i PRO provides an answer to all the critical OEM interface issues technicians encounter from a small, elegant chassis. The LC2i PRO builds upon the success of the LC2i by adding new LMC technology with load generating devices built-in, making it compatible with virtually every vehicle on the road. Also, the AccuBASS® threshold control, GTO, and Ground Select switches are on top of the unit, and an AccuBASS calibration LED has been added to the top panel as well, making the installation process far more efficient. The LC2i PRO comes complete with the ACR1 remote bass level control, giving users on-demand access to bass levels as they enjoy their music. General Features: Adjustable 2-channel line out converter Separate level adjustment for each channel 400 watt maximum input AccuBASS circuitry restores bass signal Authorized Internet Dealer 1-year Manufacturer's Warranty

Making Good Sound Great is our passion at AudioControl and that legacy continues with the LC-4.800 multi-channel amplifier. This unique high power design features six active speaker level inputs with summing allowing you to interface and integrate with most factory installed source units. The patent pending AccuBASS® circuit compensates for factory bass roll-off and provides maximum bass performance. More control and features include our GTO signal Sense, Configurable Crossovers and assignable remote level control. We have incorporated years of technology into the LC-4.800 making this a perfect solution based amplifier. features Configurable as 4/3/2 channel amplifier 4 x 200 watts @ 2 ohms 4 x 125 watts @ 4 ohms 400 watts @ 4 ohms bridged AccuBASS® Processing MILC Maximum Input Level Control (Patent Pending) GTO Signal Sense Independent Linkwitz-Riley Alignment crossovers Summable active speaker-level inputs (6 channels) for OEM integration 4 preamp inputs 2 assignable preamp outputs PFM Subsonic Filter Optional ACR-1 assignable remote control Solid One-Piece Aluminum Chassis specifications inputs Preamp Inputs: 4 balanced Input Voltage Range: 250 mV  8 V RMS outputs Rated Continuous (RMS) Power at 14.4V: 4   125 W x 4 RMS 2   200 W x 4 RMS Bridged 4   400 W RMS Preamp Outputs: 2 Maximum Preamp Output: 8.5 V RMS performance Frequency Response: 10 Hz  30 kHz Signal to Noise: 102 dBa, Ref 200 W @ 2 Ohm THD+N: < 0.1% Minimum Power / Ground Wire Gauge: 3 AWG wire Fuse Rating: 2 x 40 A Crossover: Linkwitz-Riley, Adjustable From 30 Hz  300 Hz weights & dimensions Dimensions: 9W x 7.95D x 2.1H Weight: 5.0lbs (2.0kg) in the box: LC-4.800, Speaker connectors, Fuses, Manual, Warranty