Home  > Airaid(x)
|◀ 1 - 12 of 1430 ▶|
View:
The AIRAID U-Build-It Master Kit is a complete custom air intake kit. The kit allows you to completely replace your vehicle's restrictive factory air box, paper air filter and air intake tube with AIRAID high-performance air intake components to give your engine more horsepower and torque. This UBI Master Kit features 4 inch outside diameter roto-molded intake tubes with multiple angles and straight pipes that you can cut off in any way allowing you to route the intake to any desired location in the engine compartment. The master kit also includes couplers, hump hoses, a reducer, brackets, hose clamps, hardware, and a premium red oiled AIRAID filter. This product is not legal for sale or use in California or other states adopting California emission standards.
Item#:
11-101-401
Manufacturer Item:
AIR-101-401
Manufacturer:
Airaid
Available:
Out of Stock
Your Price:
409.07
EACH
2014-2018 Chevrolet Silverado 1500; 2019 Chevrolet Silverado 1500 LD; 2015-
The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for specific Chevrolet Silverado/Suburban 1500 and Chevrolet Tahoe as well as GMC Sierra/Yukon models. This air intake starts with a replacement one-piece roto-molded air box that addresses all the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. This MXP air intake system incorporates fresh air ducting which further promotes airflow, and has provisions for the factory mass air sensor and PCV breather tube. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, th ereby eliminating the need for recalibration after installation. Just bolt it on and go! This air intake system is backed by AIRAID's No Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View this product's vehicle applications to determine the legal status for each vehicle.
Item#:
11-200-285
Manufacturer Item:
AIR-200-285
Manufacturer:
Airaid
Available:
In Stock
Your Price:
548.14
EACH
SynthaFlow MXP Series Cold Air, Red Filter, Chevy, GMC, Kit
Airaid SynthaFlow MXP Series cold air intake systems offer the power principle--more flow equals more power! These Airaid MXP intake systems feature a less-restrictive, one-piece, rotational-molded air box and a totally redesigned air intake tube. The air boxes house an oiled cotton/synthetic true performance filter--SynthaFlow. When it's combined with the computer-designed air intake tube and built-in velocity stack (depending on the application), you'll have more airflow with improved horsepower, torque, and mpg. And, better yet, you just bolt them on and go! All MXP Series intake systems include all of the necessary hardware and easy-to-follow instructions for a quick and hassle-free installation. Helping your engine breathe better increases its performance, and Airaid SynthaFlow MXP Series intake systems are the ultimate in cold air induction.
Item#:
11-200-382
Manufacturer Item:
200-382
Manufacturer:
Airaid
Available:
In Stock
Your Price:
535.96
EACH
2002-2006 Cadillac Escalade; 2003-2006 Cadillac Escalade ESV; 2002-2006 Cad
The POWERAID Throttle Body Spacer is designed to enhance off-idle torque from 800 rpm to approximately 3,000 rpm. The spacer utilizes it's unique, patented Helix Bore design to spin the incoming air charge as it passes through the throttle body spacer. The spinning air action boosts the velocity of the incoming air and contributes to better atomization of the air/fuel mixture as the air charge enters the combustion chamber. The end result is more part-throttle torque and improved mid-range power.
Item#:
11-200-512-1
Manufacturer Item:
AIR-200-512-1
Manufacturer:
Airaid
Available:
Out of Stock
Your Price:
172.56
EACH
1999-2000 Cadillac Escalade; 1996-1999 Chevrolet C1500; 1996-1999 Chevrolet
The POWERAID Throttle Body Spacer is designed to enhance off-idle torque from 800 rpm to approximately 3,000 rpm. The spacer utilizes it's unique, patented Helix Bore design to spin the incoming air charge as it passes through the throttle body spacer. The spinning air action boosts the velocity of the incoming air and contributes to better atomization of the air/fuel mixture as the air charge enters the combustion chamber. The end result is more part-throttle torque and improved mid-range power.
Item#:
11-200-520
Manufacturer Item:
AIR-200-520
Manufacturer:
Airaid
Available:
Out of Stock
Your Price:
190.83
EACH
1988-1995 Chevrolet C1500; 1988-1995 Chevrolet K1500; 1994-1995 Chevrolet S
The POWERAID Throttle Body Spacer is designed to enhance off-idle torque from 800 rpm to approximately 3,000 rpm. The spacer utilizes it's unique, patented Helix Bore design to spin the incoming air charge as it passes through the throttle body spacer. The spinning air action boosts the velocity of the incoming air and contributes to better atomization of the air/fuel mixture as the air charge enters the combustion chamber. The end result is more part-throttle torque and improved mid-range power.
Item#:
11-200-540
Manufacturer Item:
AIR-200-540
Manufacturer:
Airaid
Available:
In Stock
Your Price:
172.56
EACH
2014-2019 Chevrolet Silverado 1500; 2019 Chevrolet Silverado 1500 LD; 2015-
The POWERAID Throttle Body Spacer is designed to enhance off-idle torque from 800 rpm to approximately 3,000 rpm. The spacer utilizes it's unique, patented Helix Bore design to spin the incoming air charge as it passes through the throttle body spacer. The spinning air action boosts the velocity of the incoming air and contributes to better atomization of the air/fuel mixture as the air charge enters the combustion chamber. The end result is more part-throttle torque and improved mid-range power.
Item#:
11-200-543
Manufacturer Item:
AIR-200-543
Manufacturer:
Airaid
Available:
In Stock
Your Price:
182.71
EACH
2007-2015 Chevrolet Silverado 2500 HD; 2007 Chevrolet Silverado 2500 HD Cla
The POWERAID Throttle Body Spacer is designed to enhance off-idle torque from 800 rpm to approximately 3,000 rpm. The spacer utilizes it's unique, patented Helix Bore design to spin the incoming air charge as it passes through the throttle body spacer. The spinning air action boosts the velocity of the incoming air and contributes to better atomization of the air/fuel mixture as the air charge enters the combustion chamber. The end result is more part-throttle torque and improved mid-range power.
Item#:
11-200-606
Manufacturer Item:
AIR-200-606
Manufacturer:
Airaid
Available:
In Stock
Your Price:
169.51
EACH
2007-2013 Cadillac Escalade; 2007-2013 Cadillac Escalade ESV; 2007-2013 Cad
The POWERAID Throttle Body Spacer is designed to enhance off-idle torque from 800 rpm to approximately 3,000 rpm. The spacer utilizes it's unique, patented Helix Bore design to spin the incoming air charge as it passes through the throttle body spacer. The spinning air action boosts the velocity of the incoming air and contributes to better atomization of the air/fuel mixture as the air charge enters the combustion chamber. The end result is more part-throttle torque and improved mid-range power.
Item#:
11-200-617
Manufacturer Item:
AIR-200-617
Manufacturer:
Airaid
Available:
In Stock
Your Price:
178.65
EACH
2014-2018 Cadillac Escalade; 2014-2018 Cadillac Escalade ESV; 2014-2018 Che
The POWERAID Throttle Body Spacer is designed to enhance off-idle torque from 800 rpm to approximately 3,000 rpm. The spacer utilizes it's unique, patented Helix Bore design to spin the incoming air charge as it passes through the throttle body spacer. The spinning air action boosts the velocity of the incoming air and contributes to better atomization of the air/fuel mixture as the air charge enters the combustion chamber. The end result is more part-throttle torque and improved mid-range power.
Item#:
11-200-639
Manufacturer Item:
AIR200-639
Manufacturer:
Airaid
Available:
In Stock
Your Price:
193.87
EACH
1999-2000 Cadillac Escalade; 1996-1999 Chevrolet C1500; 1996-1999 Chevrolet
The AIRAID Air Box System is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This air box system connects to the factory air intake tube. The AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Air Box System is easy to install with common hand tools. Some AIRAID air box systems are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.
Item#:
11-201-207
Manufacturer Item:
AIR-201-207
Manufacturer:
Airaid
Available:
In Stock
Your Price:
248.16
EACH
2011-2015 Chevrolet Silverado 2500 HD; 2011-2015 Chevrolet Silverado 3500 H
The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for specific Chevrolet Silverado 2500HD/3500HD and Suburban 2500 as well as GMC Sierra 2500HD/3500HD and Yukon XL 2500 models. This air intake starts with a replacement one-piece roto-molded air box that addresses all the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. This MXP air intake system incorporates fresh air ducting which further promotes airflow, and has provisions for the factory mass air sensor and PCV tube. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while m aintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! This air intake system is backed by AIRAID's No Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View this product's vehicle applications to determine the legal status for each vehicle.
Item#:
11-201-280
Manufacturer Item:
AIR-201-280
Manufacturer:
Airaid
Available:
In Stock
Your Price:
581.64
EACH
|◀ 1 - 12 of 1430 ▶|
View: