|◀ 1 - 12 of 1027 ▶|
View:
OEM # 14080362
Item#:
3-SHS350
Manufacturer Item:
SHS350
Available:
In Stock
Your Price:
0.29
EACH
Make: 
Chevy
 Engine: 
262-400 SBC
 Material: 
Steel 
Rocker Arm Thread Size : 
3/8"-24
 Overall Length: 
2.375" 
Finish: 
Black Oxide
 Base Thread Size:
 
7/16"-14 
Quantity:
 
Sold As Set (8/pkg)
Item#:
3-SIS350
Manufacturer Item:
SIS350
Available:
In Stock
Your Price:
4.97
EACH

Assembled:No

Distributor Terminal Ends:Male/HEI and Female/Socket

Distributor Boot Color:Red

Distributor Boot Material:Silicone

Spark Plug Boot Ends:Eight 90 degree

Spark Plug Boot Color:Red

Spark Plug Boot Material:Silicone

Wire Color:Yellow

Diameter (mm):5.00mm

RFI Suppression:Yes

Coil Wire Included:Yes

Conductor Style:Spiral core

Spark Plug Wire Resistance:150 ohms/ft.

Quantity:Sold as a set.

Item#:
14-7541Y
Manufacturer Item:
7541YACC
Manufacturer:
Accel
Available:
In Stock
Your Price:
39.33
EACH
Wideband Failsafe Gauge, Monitor AFR and boost or vacuum, programmable engi
Since the Wideband Failsafe Gauge is a wideband AFR controller with an internal boost sensor (up to 29 PSIg), it is able to display AFR and either boost or vacuum in real time on a vibrant Organic LED screen. It also includes an on board data logger that records AFR, RPM* and boost/vacuum and can be downloaded and viewed in AEMdata analysis software. The gauge includes a low side output for triggering a failsafe strategy in the event AFR falls outside of the operating window, and an RPM input* to log RPM for tuning purposes. The gauges failsafe strategy is completely user definable, from something as simple as making the gauge flash to using the ground output to trigger a check engine light, to cut boost, retard timing, or even switch to a safety map using a standalone engine management system. The Wideband Failsafe Gauges software simplifies the interface set up. Choose displayed parameters (AFR, boost or vacuum) on the center OLED screen and bar graph, set the alarm flash mode and adjust the gauges lighting for a custom look, then install the correct faceplate to match your configuration (6 faceplates to choose from). Bosch Wideband UEGO sensor and weld-in bung included On-Board 3+ hour Datalogging capability at 20hz per parameter Intuitive set up software (PC based with USB connectivity) Interchangeable faceplates and bezels No free air calibration requiredever Data analysis using AEMdata software AEMnet compatible Standard 52mm gauge size
Item#:
2-30-4900
Manufacturer Item:
30-4900
Manufacturer:
AEM Electronics
Available:
In Stock
Your Price:
439.79
EACH
Filter maintenance kit.
Item#:
13-90-10011
Manufacturer Item:
90-10011
Manufacturer:
AFE Power
Available:
In Stock
Your Price:
15.99
EACH
1999-2000 Cadillac Escalade; 1996-1999 Chevrolet C1500; 1996-1999 Chevrolet
The AIRAID Air Box System is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This air box system connects to the factory air intake tube. The AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Air Box System is easy to install with common hand tools. Some AIRAID air box systems are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.
Item#:
11-201-207
Manufacturer Item:
AIR-201-207
Manufacturer:
Airaid
Available:
In Stock
Your Price:
491.99
EACH
The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for specific Chevrolet Camaro SS models. This air intake starts with a replacement one-piece roto-molded air box that addresses all the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. This MXP air intake system incorporates fresh air ducting, which further promotes airflow, and has provisions for the factory mass air sensor and crankcase vent tube. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! This air intake system is backed by AIRAID's No Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View this product's vehicle applications to determine the legal status for each vehicle.
Item#:
11-251-243
Manufacturer Item:
AIR-251-243
Manufacturer:
Airaid
Available:
In Stock
Your Price:
347.44
EACH
This item is discontinued
The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. Some CAD systems connect onto the factory air intake tube while others utilize a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools and is backed by AIRAID's exclusive No Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.
Item#:
11-510-201
Manufacturer Item:
AIR-510-201
Manufacturer:
Airaid
Available:
In Stock
Your Price:
198.52
EACH
Silver - Fit's Most Full Size Trucks
Lightweight, super strong 6063 T6 aluminum tubes | Rugged glass reinforced nylon composite uprights
Item#:
31-74504-00A
Manufacturer Item:
74504-00A
Manufacturer:
Amp Research
Available:
In Stock
Your Price:
265.99
EACH
Black - Fit's Most Full Size Trucks
Lightweight, super strong 6063 T6 aluminum tubes | Rugged glass reinforced nylon composite uprights
Item#:
31-74504-01A
Manufacturer Item:
74504-01A
Manufacturer:
Amp Research
Available:
In Stock
Your Price:
265.99
EACH
Stainless Steel Pivot Pins For Rock Solid Stability | Extruded Aluminum Steps w/Full Length Internal Ribs | Weatherproof; OEM Electric Motors/Drive System/Wiring Harness | Pressure Sensitive; Pinch Proof Safety Technology
Item#:
31-75147-01A
Manufacturer Item:
75147-01A
Manufacturer:
Amp Research
Available:
In Stock
Your Price:
1537.99
EACH
Features
  • Gauge Readout from 0 to 500cc
  • Fits virtually every Water/Methanol system on the market
  • Warning lights for overflow condition (ie: injection line pops off)
  • 320 degree viewing are for unsurpassed resolution
  • 0-5v analog output included for use with data loggers and virtually any engine management system
  • Seven backlight colors and two bezel colors (silver or black) gives you a wide range of color options to best match your interior
  • Perfectly matches other AEM Analog Gauges for clean, uniform look
Item#:
2-30-5141W
Manufacturer Item:
30-5141W
Manufacturer:
AEM Electronics
Available:
In Stock
Your Price:
79.37
EACH
|◀ 1 - 12 of 1027 ▶|
View: