|◀ 1 - 12 of 1217 ▶|
View:
LOAD GENERATING DEVICE
Using carefully selected resistors and a Zobel Network, the AC-LGD has been designed to generate load and stabilize signal from the factory system to ensure the best possible audio. The LGDs come in pairs and can be easily connected to your AudioControl Factory System Upgrade product with the pre-wired connectors.
Item#:
15-AC-LGD
Manufacturer Item:
AC-LGD
Manufacturer:
Audio Control
Available:
In Stock
Your Price:
45.99
EACH
REMOTE LEVEL CONTROL
Add remote level control for your AudioControl processor or amplifier. This is the replacement remote for the Epicenter. Comes with a 20 foot cable and removable mounting enclosure (for custom dash installations). compatible with 6XS ACM-1.300 The Epicenter® Concert Series LC2i LC6i LC7i Overdrive Plus Matrix Plus LC-4.800 LC-6.1200 legacy products supported LC6 LC8 Original Epicenter® (bypass not supported)
Item#:
15-ACR-1
Manufacturer Item:
ACR-1
Manufacturer:
Audio Control
Available:
In Stock
Your Price:
69.99
EACH
REMOTE LEVEL CONTROL
Add remote level control for your AudioControl processor or amplifier. This is the replacement remote for the LC8i, DQ-61, DQDX and The Epicenter® Amplifiers. Comes with a 20 foot cable and removable mounting enclosure (for custom dash installations). compatible with LC8i D-4.800 D-6.1200 DM-608 DM-810 DQ-61 DQDX The Epicenter® Amplifiers
Item#:
15-ACR-3
Manufacturer Item:
ACR-3
Manufacturer:
Audio Control
Available:
In Stock
Your Price:
69.99
EACH
UNIV POWER LINE WIRELESS VIDEO TRANSMITTER/RECEIVER
Crime Stopper Safety Plus SV-1200.PLW UNIV POWER LINE WIRELESS VIDEO TRANSMITTER/RECEIVER
Item#:
501-SV-1200.PLW
Manufacturer Item:
SV-1200.PLW
Manufacturer:
Crimestopper
Available:
In Stock
Your Price:
194.99
EACH
EXTENSION CABLE - 20M LONG W/4 PIN CONNECTOR FOR COMMERCI
Crime Stopper Safety Plus SV-20M.4PIN EXTENSION CABLE - 20M LONG W/4 PIN CONNECTOR FOR COMMERCI
Item#:
501-SV-20M.4PIN
Manufacturer Item:
SV-20M.4PIN
Manufacturer:
Crimestopper
Available:
In Stock
Your Price:
44.99
EACH
Radio Replacement Interface GM Class II
Installing an aftermarket receiver in many late model GM vehicles means losing the chime that warns the door is open, along with audible safety warnings. The Crux SOCGM-17 GM Class II Data Bus interface lets you replace the factory receiver in these vehicles and keep the door chime and all audible safety warnings. Connect the SOCGM-17 to the wiring harness on your new car stereo, mount the module in a convenient location, and plug it into the existing factory plug. Get the great sound you want, and keep all important safety features intact. This interface does not work with GM's Premium Bose® systems or Onstar®, and it won't allow you to keep your factory steering wheel audio controls. It will work with the standard Bose system. Warranty: 1 year. Important Note: If you do not use an interface like this when you replace your factory radio, you will disable the audible warning system in your vehicle. Crutchfield cannot provide a free wiring harness for your vehicle, and we strongly recommend that you use the recommended interface when replacing this vehicle's factory radio. Failure to do so may result in serious injury or death. Highlights: lets you install an aftermarket receiver in late model GM vehicles without losing the door chime and audible safety warnings will not work with factory steering wheel controls, Bose® or OnStar® systems dimensions: 3-7/16"W x 1-1/16"H x 2-7/8"D warranty: 1 year MFR # SOCGM-17 What's in the box: CRUX SOCGM-17 Wiring Interface owner's manual 2000-up GM Class II radio replacement interface module 11" GM Class II wiring harness Installation Instructions
Item#:
135-SOCGM-17
Manufacturer Item:
SOCGM-17
Manufacturer:
Crux
Available:
In Stock
Your Price:
84.99
EACH
Radio Replacement Interface GM LAN 29-Bit
Description: The CRUX SOCGM-18 retains General Motors factory-featured safety and warning chimes  for installation of after-market radios. It provides 12 Volt Accessory output (4 Amp), including RAP (Retained Accessory Power), Illumination Output (2A. max), telephone negative mute trigger (output to new stereo), low voltage (battery run-down protection), and adjustable chime volume. General Features: Retains factory features in select GM LAN 29 Bit vehicles with aftermarket radios Supports Bose, non-Bose and Y-91 audio systems. Retains factory front and rear parking sensors. Retains safety and warning chime functions. Adjustable Chime Volume EIA color coded wiring for easy installation. Authorized Internet Dealer 1-year Manufacturer's Warranty Compatible Vehicles Buick 2008-2015 Enclave 2006-2011 Lucerne Cadillac 2006-2011 DTS 2007-2014 Escalade 2007-2009 SRX Chevrolet 2007 - 2013 Avalanche* 2007 - 2008 Equinox 2008-2916 Express Van** 2006 - 2013 Impala / Impala SS 2006 - 2007 Monte Carlo 2007-2013 Silverado 1500-3500 Pickup* 2007-2014 Suburban* 2007-2014 Tahoe* 2009-2015 Traverse GMC 2007-2015 Acadia 2008-2013 Savana** 2007-2013 Sierra 1500-3500 Pickup* 2007-2014 Yukon* Hummer 2008-2009 H2 Pontiac 2007-2009 Torrent Saturn 2007-2010 Outlook 2008-2009 Vue Suzuki 2007-2008 XL7 Notes: Please confirm the above options prior to removing the factory radio. Some features may have to be turned on using factory menu options. *Not compatible with 2012-up SUVs/trucks that are equipped with factory-installed Navigation radios. **Not compatble with diesel-powered Express and Savana vans. Supports Rear Entertainment System with special order harness #CJA2333A, sold separately. Does not support OnStar. Does not support steering wheel retention.
Item#:
135-SOCGM-18
Manufacturer Item:
SOCGM-18
Manufacturer:
Crux
Available:
In Stock
Your Price:
118.99
EACH
Radio Replacement Interface VW
Descriptions: The CRUX SOCVW-21 is a radio replacement interface for select Volkswagen vehicles. It facilitates the integration of an after-market radio to retain factory features with Amplified and Non-Amplified Systems. General Features: Aftermarket Car Stereo Installation Interface For select 2002-Up Volkswagen Vehicles Works with amplified or non-amplified systems Retains factory-installed amplifiers With navigation outputs (Reverse gear, Illumination and speed signal) Provides Accessory Power (2A MAX) Authorized Internet Dealer 1-year Manufacturer's Warranty Compatible Vehicles Volkswagen 2012-2014 Beetle 2009-2014 CC 2006-2012 Eos 2002-2014 Golf 2006-2014 GTI 2002-2014 Jetta 2002-2014 Passat 2006-2011 Rabbit 2009-2014 Tiguan 2004-2010 Touareg Maserati 2004-Up Quattroporte
Item#:
135-SOCVW-21
Manufacturer Item:
SOCVW-21
Manufacturer:
Crux
Available:
In Stock
Your Price:
124.99
EACH
Radio Replacement Interface Toyota/Lexus - JBL System
The CRUX SOHTL-20 is a premium digital interface for select, late-model Toyota and Lexus vehicles, model years 2003 and up. It facilitates the integration of an after-market radio to the factory-fitted JBL/Premium audio system. Innovatively designed to be used with any aftermarket radio equipped with RCA output connections, for front and rear pre-amp outputs. General Features: Aftermarket Car Stereo Installation Interface For select 2003-Up Toyota and Lexus Vehicles with JBL Systems Retains factory JBL Amplifier Designed to be used with any aftermarket radio with RCA outputs for front & rear pre-amp outputs If your aftermarket radio has only one set of outputs, use "Y" splitters; there will be no fade control as a result Does not retain factory-installed Satellite radio Authorized Internet Dealer 1-year Manufacturer's Warranty Compatible Vehicles Lexus 2006 - 2009 GS 2006 - 2008 RX330/350 2006 - 2008 RX400h Toyota 2003 - 2010 4Runner 2005 - 2010 Avalon 2007 - 2012 Camry 2011 - 2011 FJ Cruiser 2008 - 2008 Highlander 2011 - 2012 Highlander 2004 - 2012 Prius 2004 - 2010 RAV4 2005 - 2011 Sequoia 2004 - 2012 Sienna 2006 - 2009 Solara 2005 - 2010 Tacoma 2004 - 2012 Tundra 2009 - 2010 Venza Notes: This unit Does Not retain Steering Wheel Controls. To retain all factory features and Steering Wheel Controls please select SWRTY-61J
Item#:
135-SOHTL-20
Manufacturer Item:
SOHTL-20
Manufacturer:
Crux
Available:
In Stock
Your Price:
124.99
EACH
OnStar Radio Repl Interface GM Class II
The CRUX SONGM-11 is designed to allow for the installation of after-market radios while retaining OnStar functionality with Bose Amplified & Non-Amplified Systems, while also retaining Chime & Accessory features in a wide range of General Motors Class II Data-bus vehicles. General Features: Aftermarket Car Stereo Installation Interface for GM Vehicles For select General Motors Class II Vehicles with Bose Amplified & Non-Amplified Systems Retains Factory OnStar Retains Factory Warning Chimes Works with Non-Bose, Standard Bose & Premium Bose / Y91 amplified systems Dimension: 5" L x 2.5" W x 8.8" H Authorized Internet Dealer 1-year Manufacturer's Warranty Compatible Vehicles Buick 2004 - 2005 Century 2005 - 2007 La Crosse 2004 - 2007 Rainer 2003 - 2007 Rendezvous 2005 - 2007 Terraza Cadillac 2004 - 2006 Escalade 2004 - 2006 Escalade ESV 2004 - 2006 Escalade EXT Chevrolet 2003 - 2006 Avalanche 2003 - 2005 Blazer S-10 2000 - 2005 Cavalier 2004 - 2011 Colorado 2005 - 2010 Corvette 2000 - 2005 Impala/ Impala SS 2001 - 2003 Malibu 2004 - 2004 Malibu (Classic) 2000 - 2005 Monte Carlo 2003 - 2004 Pickup S-10 2003 - 2006 Silverado 1500-3500 2007 - 2007 Silverado 1500-3500 (Classic) 2004 - 2006 SSR 2003 - 2006 Suburban 2003 - 2006 Tahoe 2002 - 2009 Trailblazer 2005 - 2009 Uplander GMC 2004 - 2011 Canyon 2002 - 2009 Envoy 2004 - 2007 Envoy XUV 2003 - 2007 Savana 2003 - 2006 Sierra 1500-3500 2007 - 2007 Sierra 1500-3500 (Classic) 2002 - 2004 Sonoma 2003 - 2006 Yukon/ XL Hummer 2003 - 2007 H2 2005 - 2010 H3/H3T Isuzu 2004 - 2008 Ascender 2006 - 2008 i280/i290/i350 Oldsmobile 2001 - 2004 Alero (w/RDS Radio) 2002 - 2004 Bravada 2002 - 2002 Intrigue 2000 - 2002 Silhouette (w/chime) 2003 - 2004 Silhouette Pontiac 2001 - 2005 Aztek 2001 - 2005 Grand AM 2004 - 2008 Grand Prix 2000 - 2005 Sunfire Saab 2005-2008 9-7X Saturn 2007 Relay
Item#:
135-SONGM-11
Manufacturer Item:
SONGM-11
Manufacturer:
Crux
Available:
In Stock
Your Price:
199.99
EACH
Radio Replacement Interface Chrysler/Dodge/Jeep
Wire in a new radio Crux's SOOCR-26 interface ensures that you can keep the factory amplifier in your Chrysler-made vehicle when you replace the factory radio; the interface also works in vehicles without a factory amplifier. Once you connect this interface to the wires on your new stereo's wiring harness, you've covered the power, ground, and factory speaker connections for your new stereo. The SOOCR-26 interface also offers the reverse, illumination, and Vehicle Speed Sensor (V.S.S.) outputs that you'll need if you're installing a navigation receiver. The Crux interface is designed to work with the factory Chrysler CAN-bus systems. Product highlights: connect a new stereo in select 2005-17 Chrysler, Dodge, and Jeep models provides connections for Vehicle Speed Sensor (V.S.S.), reverse gear, and illumination for installing navigation receivers works in systems with or without a factory amplifier warranty: 1 year MFR # SOOCR-26 What's in the box: Crux SOOCR-26 Wiring Interface owner's manual Radio replacement interface 1st Gen wiring harness 2nd Gen wiring harness Installation Instructions
Item#:
135-SOOCR-26
Manufacturer Item:
SOOCR-26
Manufacturer:
Crux
Available:
In Stock
Your Price:
133.99
EACH
Radio Replacement Interface Ford/Lincoln/Mercury - CANBUS
Wire in a new radio Crux's SOOFD-27 interface ensures that you can keep the factory speaker system in your Ford, Lincoln, or Mercury vehicle when you replace the factory radio. Connect the wires from this interface to the wires on the new stereo's wiring harness, and your power, ground, and factory speaker connections are covered. If your audio system has a factory amp and sub, the Crux interface can also keep them working too. The Crux interface lets you keep your car's auxiliary input active as well, but you'll have to choose a new car stereo with a rear aux input, as the Crux adapter's RCA connectors plug into that rear input. The SOOFD-27 interface also offers the parking brake, reverse, mute, and Vehicle Speed Sensor (V.S.S.) outputs that you'll need if you're installing a navigation receiver. If you like your radio to keep playing after your vehicle is turned off, this interface also supports Retained Accessory Power (RAP) which keeps the music going until the door is opened. Important Installation Notes The SOOFD-27 interface is not compatible with factory SONY systems or the THX amplified systems. If you're keeping your factory sub, you'll need to choose a car stereo with a dedicated sub preamp output (full-range preamp outputs will not work). If you're keeping your vehicle's aux input, you'll want to choose a car stereo with a rear aux input, preferably RCA inputs that the SOOFD-27's RCA connectors can plug into. Product highlights: connect a new stereo to your factory wiring plug and retain Retained Accessory Power (RAP) provides connections for parking brake, Vehicle Speed Sensor (V.S.S.), reverse gear, and illumination for installing navigation receivers retains factory amp and subwoofer retains your car's auxiliary input; new car stereo must have rear aux input to accept adapter's RCA connectors warranty: 1 year MFR # SOOFD-27 What's in the box: Crux SOOFD-27 Wiring Interface owner's manual Radio replacement interface module (for Ford/Lincoln/Mercury) Wiring harness Installation Instructions
Item#:
135-SOOFD-27
Manufacturer Item:
SOOFD-27
Manufacturer:
Crux
Available:
In Stock
Your Price:
124.99
EACH
|◀ 1 - 12 of 1217 ▶|
View: