S2KVehicleSearch
S2K Commerce - Products Dropdown - JBs
S2K Commerce - Order Entry
Premium 6 input 8 output dsp matrix processor
The powerful DM-608 processor allows users to truly optimize the performance of their audio system, regardless of whether they are using a factory or aftermarket source, and to truly achieve the goal of Making Good Sound Great.
These highly versatile Digital Signal processors are equipped with key features, such as active speaker level inputs, line-level and digital audio inputs, providing up to 8 channels of output. AudioControls smart user interface contains the power of AudioControl processing through a flexible PC interface packed full of features in a simple lay out. Configure signal summing, 30 bands of equalization, signal time-alignment, input delay and phase correction, plus AudioControl proprietary features like AccuBASS®, GTOTM Signal Sense, and MILCTM as well as integrated input and output RTAs.
The built in Option Port on the DM-608 is the future of car audio and will allow hi-res streaming directly into the DSP. It also opens up future proprietary connections for additional inputs, controllers and interface solutions.
features
Input and Output RTA for precise and informed tuning
GTOTM Signal Sensing
MILCTM Clip Detection
AccuBASS®
Signal Summing
Signal Delay
12 and 24 dB/octave crossovers
30 band equalizer
Optional ACR-3 remote for preset recall and level control
Optional AC-BT24 Bluetooth Streamer/Programmer
DM Smart DSP app available in downloads for Mac/PC or
milctm
The DM-810 features AudioControls MILCTM (Maximum Input Level Control) patent-pending source clip detection circuit. MILCTM calculates when the waveform of an incoming audio signal is clipping, and if it is, the LED will fulfill its prime objective and shine forth, aiding in precise level matching control.
option port
The built in Option Port on the DM-810 is the future of car audio and allows hi-res streaming and DSP programming directly into the DSP using the AC-BT24 Bluetooth Streamer/Programmer. It also opens up future proprietary connections for additional inputs, controllers and interface solutions. Watch this space for future Option Port expansion options.
dm smart dsp
Connect your laptop to the DM-608 using AudioControls DM Smart DSP app, a fully featured Matrix DSP Interface designed to give you instant and clear control over every aspect of your processor.
Route any input to any output, adjust gain, delay and polarity then precisely tune the DM-608 using a 30 band EQ. High-pass, low-pass and band-pass can be set up for any output using 12 or 24 dB/octave Linkwitz-Riley crossovers.
For OEM integration, take advantage of the input and output RTAs, available for every input and output, to easily identify and sum factory speaker signals.
With a clear GUI and intuitive workflow, AudioControls DM Smart DSP will take the guesswork out of tuning your system to your exact specifications.
specifications
inputs
Preamp Input Channels: 6
Digital Inputs: 1 x Toslink and Coax
Input Impedance Preamp / Speaker-level: 20 k / 7 k
outputs
Preamp Outputs Channels: 8
Maximum Output Level: 10 Vrms
Output Impedance: 150
performance
Total Harmonic Distortion: 0.01%
Frequency Response: 20 Hz to 24 kHz
Crossover Frequency: variable
Crossover Type: 12 and 24 dB/octave Linkwitz-Riley
control
12 VDC Remote In
12 VDC Remote Out (always active when unit is on)
general
Power Supply: High Headroom PWM Switching
Current Draw: 1A
Recommended Fuse Rating: 3A
weights & dimensions
Dimensions: 9.4W x 5.7D x 1.6H
Weight: 2.4lbs (1.1kg)
in the box: DM-608, Power and Speaker Connectors, Manual, Warranty
Item#:
15-DM-608
Manufacturer Item:
DM-608
Manufacturer:
Audio Control
Available:
In Stock
Your Price:
819.99
EACH
2-CH LINE OUTPUT CONVERTER W/ACCUBASS
The LC2i, is a compact, two-channel processor with active input circuitry, which allows it to accept speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers. It converts them to high-quality pre-amp signals that can then be directed to after-market processors and/or amplifiers. Users can enjoy maximum sound quality while maintaining the use of factory volume and steering wheel controls.
features
Two channels of Active speaker level inputs Accept 400 watt signals per channel
Fixed and variable outputs with discrete level controls
AccuBASS® processing for correction of bass roll-off
GTOTM Signal Sensing
Input For Optional Remote Level Control
Compact design
Item#:
15-LC2I
Manufacturer Item:
LC2i
Manufacturer:
Audio Control
Available:
In Stock
Your Price:
159.99
EACH
2-CH LINE OUTPUT CONVERTER INCLUDES ACR-1
Product Overview
The AudioControl LC2i PRO provides an answer to all the critical OEM interface issues technicians encounter from a small, elegant chassis. The LC2i PRO builds upon the success of the LC2i by adding new LMC technology with load generating devices built-in, making it compatible with virtually every vehicle on the road. Also, the AccuBASS® threshold control, GTO, and Ground Select switches are on top of the unit, and an AccuBASS calibration LED has been added to the top panel as well, making the installation process far more efficient. The LC2i PRO comes complete with the ACR1 remote bass level control, giving users on-demand access to bass levels as they enjoy their music.
General Features:
Adjustable 2-channel line out converter
Separate level adjustment for each channel
400 watt maximum input
AccuBASS circuitry restores bass signal
Authorized Internet Dealer
1-year Manufacturer's Warranty
Item#:
15-LC2IPRO
Manufacturer Item:
LC2I PRO
Manufacturer:
Audio Control
Available:
In Stock
Your Price:
219.99
EACH
6-CH LINE OUTPUT CONVERTER & INTERNAL SUMMING & ACCUBASS
The AudioControl LC7i, six channel active line converter, allows all music lovers, who want a great in-car audio experience, to keep their factory installed source unit and dramatically improve their system performance. The LC7i delivers amazing sound quality and fixes one of the biggest letdowns of todays factory systems, weak BASS!
Designed for maximum sound quality and enhanced audio performance, the LC7i incorporates AccuBASS. This patented process automatically corrects for the bass roll-off that is common with many factory-installed audio systems and AudioControls unique and exclusive AccuBASS circuitry maintains and restores the Bass as the volume is turned up, improving the audio performance.
The LC7i allows the flexibility of powering the audio signals downstream to single or multiple factory amps maximizing sound quality & achieving high output at a great price. In addition, the LC7i is designed to fit into a compact chassis allowing an easy & flexible factory system upgrade in todays space constrained vehicles. The ACR-1 dash remote (sold separately) allows the user to control the level of the low frequency output.
features
Six channels of active speaker level inputs accepts up to 400 watts per channel
Patent Pending AccuBASS circuitry
Optional ACR-1 Remote allows for user control of the subwoofer level
Internal Channel Summing For interfacing with factory installed amplifiers with built-in crossovers
GTO (Great Turn-On) Circuit Powers up the LC7i when it detects signal on the speaker level input
Output level control
Compact chassis allowing for ease of installation
specifications
inputs
Speaker Level Inputs: 3 (6 channels)
Maximum Input (speaker level): 400W per channel at 4
Input Impedance: 20k
outputs
Preamp Outputs: 3 (6 channels)
Maximum Output Level: 8.5Vrms
Output Gain: ±12dB
Output Impedance: 150
performance
Total Harmonic Distortion: 0.01%
Frequency Response: 10Hz-22kHz
control
Remote In
12VDC Remote Out (always active when unit is on)
general
Power Supply: High Headroom PWM Switching
Current Draw: 350mA
Recommended Fuse Rating: 2A
weights & dimensions
Dimensions: 7.5W x 4.7D x 1.2H
Weight: 1.5 lbs (0.7 kg)
in the box: LC7i, Speaker and Power connectors, Manual, Warranty
Item#:
15-LC7I
Manufacturer Item:
LC7i
Manufacturer:
Audio Control
Available:
In Stock
Your Price:
299.99
EACH
2-CH EQUALIZER CROSSOVER W/PFM SUBSONIC FILTER
A state-variable, 18dB/octave, 2-way electronic crossover designed with a flexible and accurate module-programmable crossover frequency. Our exclusive Programmable Frequency Match (PFM) subsonic filter provides exceptional bass control. Winner of the coveted CES Design and Engineering Excellence Award.
features
Two channel operation
Precise 2-way 18dB/octave, programmable electronic crossover with a plug-in module
Programmable Frequency Match (PFM) subsonic filter
Balanced inputs
On-board line driver for signal gain
Output level controls
Selectable ground isolation
Optimum signal output indicator LEDs
The finest quality designed and built in America
specifications
inputs
Preamp Inputs: 1 (2 channels)
outputs
Preamp Outputs: 1 (2 channels)
Maximum Output Level: 9.5Vrms
performance
Total Harmonic Distortion: 0.005%
Frequency Response: 15Hz-20kHz ±1dB
Signal to Noise: 115dB at full output
Crossover Type: 18dB/octave
Crossover Frequency: 90Hz from factory (user programmable)
control
Remote In
general
Power Supply: Transformer Isolated PWM
Current Draw: 150mA
Recommended Fuse Rating: 1A
weights & dimensions
Dimensions: 5.5W x 4.65D x 1.15H
Weight: 2.0lbs (0.91kg)
in the box: 2XS, Power Connector, Manual, Warranty
Item#:
15-2XS
Manufacturer Item:
2XS
Manufacturer:
Audio Control
Available:
Special Order
Your Price:
219.99
EACH
6-CH ELECTRONIC CROSSOVER W/SUB LEVEL CONTROL
The 6XS does it all. Sharp 24dB/octave Linkwitz-Riley alignment crossover with remote level control for the bass. Automode input switching automatically configures the 6XS for two, four or six channels of input with up to eight channels of output. Includes bass management with the Programmable Frequency Match (PFM) circuit and a high tech PWM power supply for maximum voltage in all conditions.
features
Six Channels in Eight Channels Out
State-Variable, 24dB per Octave, 2-way Active Crossover
Audiophile Crossover Performance
Output Level Controls
High Voltage Outputs
Low Impedance Line Driver
Remote Subwoofer Level Control
PFM Subsonic Filter
Bass Output Control
specifications
inputs
Preamp Inputs: 3 (6 channels)
Input Gain: 12dB (front/rear), 18dB (sub)
Input Impedance: 20k
outputs
Preamp Outputs: 4 (8 channels)
Maximum Output Level: 9.5Vrms / 13V peak
Output Impedance: 150
performance
Total Harmonic Distortion: 0.005%
Frequency Response: 10Hz-100kHz ±1dB
Signal to Noise: 110dB
Crossover Type: 24dB/octave Linkwitz-Riley
Crossover Frequency: 90 Hz from factory (user programmable)
control
Remote In
general
Power Supply: High Headroom PWM
Current Draw: 400mA
Recommended Fuse Rating: 2A
weights & dimensions
Dimensions: 7.25W x 7.7D x 1.25H
Weight: 2.5lbs (1.13kg)
in the box: 6XS, Power Connector, Manual, Warranty
Item#:
15-6XS
Manufacturer Item:
6XS
Manufacturer:
Audio Control
Available:
Special Order
Your Price:
419.99
EACH
Premium 8 input 10 output dsp matrix processor
When you require total control and optimization to achieve great sound quality, AudioControls DM-810 Processor is the solution.
The powerful DM-810 processor allows users to truly optimize the performance of their audio system, regardless of whether they are using a factory or aftermarket source, and to truly achieve the goal of Making Good Sound Great.
These highly versatile Digital Signal processors are equipped with key features, such as active speaker level inputs, line-level and digital audio inputs, providing up to 10 channels of output. AudioControls DM Smart DSP app (available as a free download) contains the power of AudioControl processing through a flexible interface packed full of features in a simple lay out. Configure signal summing, 30 bands of equalization, signal time-alignment, input delay and phase correction, plus AudioControl proprietary features like AccuBASS®, GTOTM Signal Sense, and MILCTM as well as integrated input and output RTAs.
The built in Option Port on the DM-810 is the future of car audio and will allow hi-res streaming directly into the DSP. It also opens up future proprietary connections for additional inputs, controllers and interface solutions.
Designed to be the ultimate in sound quality and enhanced audio performance, the DM-810 is our latest AudioControl processor that sets a new standard for sound and what can be achieved in car audio systems.
features
Input and Output RTA for precise and informed tuning
GTOTM Signal Sensing
MILCTM Clip Detection
AccuBASS®
Signal Summing
Signal Delay
12 and 24 dB/octave crossovers
30 band equalizer
Optional ACR-3 remote for preset recall and level control
Optional AC-BT24 Bluetooth Streamer/Programmer
DM Smart DSP app available in downloads for Mac/PC or
milctm
The DM-810 features AudioControls MILCTM (Maximum Input Level Control) patent-pending source clip detection circuit. MILCTM calculates when the waveform of an incoming audio signal is clipping, and if it is, the LED will fulfill its prime objective and shine forth, aiding in precise level matching control.
option port
The built in Option Port on the DM-810 is the future of car audio and allows hi-res streaming and DSP programming directly into the DSP using the AC-BT24 Bluetooth Streamer/Programmer. It also opens up future proprietary connections for additional inputs, controllers and interface solutions. Watch this space for future Option Port expansion options.
dm smart dsp
Connect your laptop to the DM-810 using AudioControls DM Smart DSP app, a fully featured Matrix DSP Interface designed to give you instant and clear control over every aspect of your processor.
Route any input to any output, adjust gain, delay and polarity then precisely tune the DM-810 using a 30 band EQ. High-pass, low-pass and band-pass can be set up for any output using 12 or 24 dB/octave Linkwitz-Riley crossovers.
For OEM integration, take advantage of the input and output RTAs, available for every input and output, to easily identify and sum factory speaker signals.
With a clear GUI and intuitive workflow, AudioControls Smart User Interface will take the guesswork out of tuning your system to your exact specifications.
Item#:
15-DM-810
Manufacturer Item:
DM-810
Manufacturer:
Audio Control
Available:
Special Order
Your Price:
949.99
EACH
6CH EQ & LINE OUTPUT CONVERTER & SIGNAL DELAY & ACCUBASS
The environment of todays automobiles present challenges for the installation of a performance car audio system when matched to a factory source unit. Less than ideal speaker locations coupled with an acoustically unfriendly environment can compromise the experience. Fortunately for audio enthusiasts, the new AudioControl DQ-61 delivers the processing power necessary to maximize the audio experience.
AudioControl engineers designed the DQ-61 to be an extraordinary processor, so subsequently it is equipped with a number of installer friendly features that simplify the OEM connection and calibration process.
User friendly Signal Delay controls allow the listeners the ability to align themselves between the left and right speakers plus seamlessly blend in the subwoofer to the listening environment. Discrete equalization controls provide listeners with powerful processing to properly tune their audio systems and enjoy truly amazing sound.
Designed for maximum sound quality and enhanced audio performance, the DQ-61 is the latest AudioControl processor to incorporate AccuBASS®. This patent pending process automatically corrects for the bass roll-off that is common with many factory-installed audio systems.
features
User friendly Signal Delay enhances the acoustical alignment between the left and right channels plus the front and subwoofer channels
Individual equalization controls for the front, rear and subwoofer channels for simple yet precise system tuning
Six channels of active speaker level inputs accepts up to 400 watts per channel
AccuBASS® AudioControls patented pending processing to correct the bass roll-off in factory source units
ACR-3 Dash Control Remote allows for control of the subwoofer level plus processing bypass which makes it ideal for demonstrations
Internal Channel Summing Easy interface with factory installed amplifiers with built-in crossovers
GTOTM (Great Turn-On) Circuit Powers up the DQ-61 when it detects signal on the main speaker level input
Discrete Input and output level controls
Free iOS Mobile Tools app with DQ-61 Delay module
specifications
inputs
Speaker Level Inputs: 3 (6 channels)
Maximum Input (speaker level): 400W per channel at 4
Input Impedance: 20k
outputs
Preamp Outputs: 3 (6 channels)
Maximum Output Level: 7.5Vrms
Output Gain: ±12dB
Output Impedance: 150
performance
Total Harmonic Distortion: 0.01%
Frequency Response: 10Hz-22kHz
Equalizer Frequencies (front/rear): 125Hz, 175Hz, 250Hz, 500Hz, 1kHz, 2kHz, 8kHz
Equalizer Frequencies (sub): 31.5Hz, 40Hz, 50Hz, 63Hz, 80Hz, 100Hz, 125Hz
Signal Delay Max (Left/Right): 10ms
Signal Delay Max (Front/Sub): 35ms
control
Remote In
12VDC Remote Out (always active when unit is on)
general
Power Supply: High Headroom PWM Switching
Current Draw: 350mA
Recommended Fuse Rating: 2A
weights & dimensions
Dimensions: 8.6W x 5D x 1.25H
Weight: 3.0lbs (1.4kg)
in the box: DQ-61, ACR-3 Remote, Speaker and Power connectors, Manual, Warranty
Item#:
15-DQ-61
Manufacturer Item:
DQ-61
Manufacturer:
Audio Control
Available:
Special Order
Your Price:
489.99
EACH
6-CH EQUALIZER W/SIGNAL DELAY/ CROSSOVER/LINE DRIVER
Putting the driver in perfect acoustical alignment definitely has its challenges in a vehicle. In home audio it is generally pretty easy to just move a speaker forward or backward or to the left or to the right to help make sure you hear both speakers at the same time. In a vehicle, we are typically stuck with the speaker locations that the vehicle manufactures has supplied us with. This usually creates a whole slew if issues when you add amplifier power, new speakers, and subwoofers. This is why signal delay and equalization are so critical. Equalization helps match all your new components together so they sound great and signal delay helps all that great sound arrive at you, the driver at the same time!
Designed for maximum sound quality and enhanced audio performance, the DQDX is the latest AudioControl processor to incorporate Signal Delay. This process corrects for the varying speaker locations in the vehicle.
The AudioControl DQDX lets music enthusiasts truly take control of their sound and receive an amazing experience.
features
Free iOS Mobile Tools app with DQ-61 Delay module
User-friendly Signal Delay to control the acoustical alignment between the left and right channels plus the front and subwoofer channels
Individual equalization controls for the front, rear and subwoofer channels for simple yet precise system tuning
Fully adjustable 24dB/Octave Linkwitz-Riley electronic crossover
PFM (Program Frequency Match) Subsonic Filter
Six channels of RCA line level inputs
ACR-3 Dash Control Remote allows for control of the subwoofer level plus processing bypass
Discrete Input and Output level controls with clipping indicators
Remote turn on output provides a 12-volt trigger to turn on your amplifier
Built in Pink Noise for easy Signal Delay and Equalizer tuning and system set-up
Bulletproof 5 year warranty (when installed by an authorized AudioControl dealer)
specifications
inputs
Preamp Inputs: 3 (6 channels)
Input Impedance: 20k
outputs
Preamp Outputs: 3 (6 channels)
Maximum Output Level: 7.5Vrms
Output Gain: ±12dB
Output Impedance: 150
performance
Total Harmonic Distortion: 0.01%
Frequency Response: 10Hz-22kHz
Equalizer Frequencies (front/rear): 125Hz, 175Hz, 250Hz, 500Hz, 1kHz, 2kHz, 8kHz
Equalizer Frequencies (sub): 31.5Hz, 40Hz, 50Hz, 63Hz, 80Hz, 100HZ, 125Hz
PFM Frequency: 20Hz or 30Hz selectable
Crossover Frequency: 50Hz-500Hz selectable
Crossover Type: 24dB/Octave Linkwitz-Riley
Signal Delay Max (Left/Right): 10ms
Signal Delay Max (Front/Sub): 35ms
control
Remote In
12VDC Remote Out (always active when unit is on)
general
Power Supply: High Headroom PWM Switching
Current Draw: 350mA
Recommended Fuse Rating: 2A
weights & dimensions
Dimensions: 9.25W x 5.75D x 1.25H
Weight: 3.0lbs (1.4kg)
in the box: DQDX, ACR-3 Remote, Power and Speaker Connectors, Manual, Warranty
Item#:
15-DQDX
Manufacturer Item:
DQDX
Manufacturer:
Audio Control
Available:
Special Order
Your Price:
489.99
EACH
BASS RESTORATION PROCESSOR
Your MP3 player thinks your car stereo is a pair of headphones, so it removes the bass! The Epicenter restores the earth-shaking power and heart-pounding bass your subwoofers crave.
Give your subwoofers the juice to go lower and hit harder. The Epicenter uses a bass circuit to drive your subwoofers lower, grabbing the attention of every eye on the boulevard.
features
Patented Bass Maximizer
Dash mount control
Bass restoration lighted display
Parametric bass control
PFM Subsonic Filter
Balanced inputs
Bass Output Control
specifications
inputs
Preamp Inputs: 1 (2 channels)
Maximum Input Level: 15Vrms
Input Impedance: 10k
outputs
Preamp Outputs: 1 (2 channels)
Maximum Output Level: 13.5Vrms
Output Impedance: 150
performance
Total Harmonic Distortion: 0.003%
Frequency Response: 10Hz-100kHz
Signal to Noise: 110dB
control
Remote In
general
Power Supply: High Headroom PWM Switching
Current Draw: 150mA
Recommended Fuse Rating: 1A
weights & dimensions
Dimensions: 8W x 5.5D x 1.2H
Weight: 1.8 lbs (0.8 kg)
in the box: The Epicenter, ACR-1 Remote, Power Connector, Manual, Warranty
Item#:
15-EPICENTER
Manufacturer Item:
The Epicenter
Manufacturer:
Audio Control
Available:
Special Order
Your Price:
329.99
EACH
IN-DASH BASS RESTORATION 160dB SPL MICROPHONE & DISPLAY
If you want the best bass possible and a way to measure how loud your system is playing, The Epicenter InDash car audio processor is the perfect product for you. The Epicenter InDash is an expert combination of the bass enhancement circuits along with a microphone and a 160-dB SPL (sound pressure level) display. The display will show real time SPL or hold the highest value so you can show your friends. It will also display voltage so you can monitor your vehicles electrical systems. With AudioControls unique Para-Bass equalization control, you select the frequency and bandwidth for the enhanced bass action. The Epicenter InDash car audio processor gives you great bass and a way to see the result.
The Epicenter InDash uses AudioControls bass restoration circuitry, which actually adds lower octaves of bass to any performance autosound system. In addition, The Epicenter InDash includes AudioControls Para-Bass equalization, which allows the user to fine-tune the bass response to their specific vehicle. The net result is more basslouder.
In addition to allowing users to maximize their bass response, the new The Epicenter InDash offers a specially designed microphone mounted on the front panel that can measure up to 160 dB. The SPL is then shown on an LED display on the front panel of The Epicenter InDash. Optionally, users of The Epicenter InDash may select to see their SPL measurement constantly updating or in a peak hold mode. The display also will show the systems power voltage with one tenth volt resolution.
All AudioControl autosound components are backed by our industry leading, FIVE year parts and labor warranty when installed by an authorized dealer.
features
AudioControl unique bass restoration circuit
SPL display up to 160 dB
Battery Voltage indicator
Speaker level inputs
Para-BASS Controls
Balanced differential inputs
specifications
inputs
Preamp Inputs: 1 (2 channels)
Maximum Input Level: 15Vrms
Speaker Level Inputs: 1 (2 channels)
Input Impedance: 10k
outputs
Preamp Outputs: 1 (2 channels)
Maximum Output Level: 13.5Vrms
Output Impedance: 160
performance
Total Harmonic Distortion: 0.003%
Frequency Response: 10Hz-100kHz
Signal to Noise: 110dB
Balanced Input Noise Rejection: 60dB
Microphone SPL range: 70 dB-SPL to 160 dB-SPL
control
Remote In
general
Power Supply: High Headroom PWM Switching
Current Draw: 285mA
Recommended Fuse Rating: 1A
weights & dimensions
Dimensions: 6.75W x 5D x 1H
Weight: 2lbs (0.9kg)
in the box: The Epicenter InDash, Power and Speaker Connectors, Manual, Warranty
Item#:
15-EPICENTER-INDASH
Manufacturer Item:
The Epicenter Indash
Manufacturer:
Audio Control
Available:
Special Order
Your Price:
399.99
EACH
BASS RESTORATION PROCESSOR W/SPEAKER LEVEL INPUTS/AUX
Adding impactful bass to your factory installed system is simple with The Epicenter® Plus. The added OEM Interface on The Epicenter Plus converts your speaker-level signals into high quality pre-amp outputs to give you More Bass, LOUDER! Plus, you get an auxiliary input for adding secondary sources (like iPods and Satellite Radio).
The high-impedance Speaker Level Inputs allow you tap off factory speaker leads for simple addition of aftermarket subwoofers to any factory audio system. AudioControls exclusive GTO Signal Sense Turn-on and corresponding 12-volt remote output provide the turn-on lead for aftermarket amplifiers. In addition to speaker-level inputs, The Epicenter Plus has line-level inputs for use with aftermarket systems.
The Epicenter Plus uses AudioControls famous Digital Bass Restoration to drive your subwoofers lower, grabbing the attention of every ear on the boulevard.
features
Patented Bass Restoration Circuitry
Speaker-Level Inputs for Integration with Factory Audio Systems
Auxiliary Input for iPods, MP3 players or Satellite radio tuners
GTO Signal Sensing Inputs for Automatic Turn-on
Bass Maximization Circuitry
12 volt trigger output
Dash mount control
PFM Subsonic Filter
Balanced Pre-amp inputs
specifications
inputs
Preamp Inputs: 1 (2 channels)
Maximum Input Level: 9.5Vrms
Aux Input: 1 (2 channels)
Speaker Level Inputs: 1 (2 channels)
Maximum Speaker Level Input: 400W at 4
Input Impedance: 20k
outputs
Preamp Outputs: 1 (2 channels)
Maximum Output Level: 9.5Vrms
Output Impedance: 150
performance
Total Harmonic Distortion: 0.003%
Frequency Response: 10Hz-22kHz
Signal to Noise: 110dB
Balanced Input Noise Rejection: >60dB
control
Remote In
12VDC Remote Out (always active when unit is on)
general
Power Supply: High Headroom PWM Switching
Current Draw: 285mA
Recommended Fuse Rating: 2A
weights & dimensions
Dimensions: 8W x 6.25D x 1.15H
Weight: 3.5lbs (1.6kg)
in the box: The Epicenter Plus, ACR-2 Remote, Power Connector, Manual, Warranty
Item#:
15-EPICENTER-PLUS
Manufacturer Item:
The Epicentre Plus
Manufacturer:
Audio Control
Available:
Special Order
Your Price:
399.99
EACH