|◀ 85 - 88 of 88 ▶|
View:
ELITE CLASS D MONO AMP 4500W
Model Z-4.5K1D Number Of Channels 1 Frequency Response 10Hz-250Hz Max Power 4500W 1 Ohm RMS Power (14.4 V) Per Channel 1x1520W 2 Ohm RMS Power (14.4 V) Per Channel 1x1010W 4 Ohm RMS Power (14.4 V) Per Channel 1x600W Speaker Impedance Range 1-8 ohm Input Sensitivity 0.2V-+6v Low Pass Filter 40Hz-250Hz Fuse Size 4x40A Signal-To-Noise Ratio >85dB THD <0.2% Bass Boost 0dB-+18dB Product Dimensions (LxWxH) 385x239x54mm
Item#:
188-Z-4.5K1D
Manufacturer Item:
Z-4.5K1D
Manufacturer:
DS18
Available:
Special Order
Your Price:
429.99
EACH
2 CHANNEL SPORTS SERIES AMP
Empower your speakers Our customers often tell us that Kenwood makes rugged amplifiers that bring superior sound quality along with reliable performance. Kenwood's KAC-5207 2-channel amplifier can deliver a true 70 watts RMS per channel to your full-range speakers  you'll hear all the tonal color, impact, and musical detail you've been missing, from the punch of the rhythm section to the shiver induced by your favorite singer's voice. Works for bass too You can also use this versatile amp to power a subwoofer with up to 170 watts RMS in mono mode, with a built-in low-pass filter that allows you to send only bass below 80 Hz to your sub. You'll also find speaker-level inputs with signal sensing turn-on, so you can put this amp to work in just about any kind of system. The cast-aluminum heat sink gets rid of heat efficiently when you're cranking the volume. READ LESS Product highlights: 2-channel car amplifier 70 watts RMS x 2 at 4 ohms (85 watts x 2 at 2 ohms) 170 watts RMS x 1 bridged at 4 ohms (4-ohm stable in bridged mode) CTA-2006 compliant Class AB design switchable low-pass filter (80 Hz at 18 dB per octave) preamp and speaker-level inputs signal sensing turn-on with high-level inputs eliminates need for remote lead 10-gauge power and ground leads recommended  wiring and hardware not included with amplifier fuse rating: 25A x 1 9-1/16"W x 2-3/16"H x 6-9/16"D
Item#:
333-KAC-5207
Manufacturer Item:
KAC-5207
Manufacturer:
Kenwood
Available:
Out of Stock
Your Price:
113.99
EACH
This item is discontinued
Punch 400 Watt Full-Range 4-Channel Amplifier
The Rockford PBR400X4D is a full-range 4-channel amplifier designed for stereo front/rear systems that requires little space. The BRT (Boosted Rail Technology) is an ultra efficient design that generates 400 Watts of power! The BRT also has a variable hi-level DC offset turn-on circuit for easy installation into any OEM system. Great for motorcycles and recreational vehicles.
Item#:
239-PBR400X4D
Manufacturer Item:
PBR400X4D
Manufacturer:
Rockford Fosgate
Available:
Out of Stock
Your Price:
389.99
EACH
2 CH 50X4 @ 4 OHMS PRIME AMP
This item has been discontinued and replaced by item 
Rockford Fosgate amplification at an unbelievable value. The R300X4 4-channel amplifier is so versatile, it will be the only amplifier your system needs. Full-range or component speakers on the front channels and a single R1S410 10" or R1S412 12" woofer bridged/mono on the rear. Consider your system clean, loud and done! Check out our RFTECH:Woofer WiringWizard to get the most out of your amplifier. 12dB/octave Butterworth crossover 0/6/12 dB On Board Punch EQ Control 2/4 channel input switch High Level Input (4-pin) Separate Front and Rear Gain Control Real time output and power supply thermal sensing Cast aluminum heatsink 4 Gauge power/ground connectors MOSFET power supply Over current protection Short circuit protection Muted turn on 1 Year Warranty
Item#:
239-R300X4
Manufacturer Item:
R300X4
Manufacturer:
Rockford Fosgate
Available:
Out of Stock
Your Price:
269.50
EACH
This item is discontinued
|◀ 85 - 88 of 88 ▶|
View: