|◀ 1 - 12 of 1086 ▶|
View:
AEM Electronics 30-0352 Boost Control and Display in 1
AEM Electronics Tru-BoostX gauge-type controller kits feature an electronic boost controller that combines the simplicity of a manual boost controller with the added ease of adjusting boost levels through a gauge interface. There is no external interface required for setup and they are fully functional right out of the box. If you want more boost, press the button on the right of the gauge face, and if you want less boost, press the button on the left of the gauge face. It's that simple, and it works! The AEM Electronics Tru-BoostX gauge-type controller kits contain everything you need, including an on-board 80 psig pressure sensor, built-in overboost protection with two timed shutdown levels, a scramble boost setting, and a low-side output for a warning light. AEM includes a boost control solenoid that is the only one specifically manufactured for automotive boost applications. This means that it will not corrode and stick from exposure to rich fuel mixtures, is pressure-tested to 100 psi, and includes -4 AN fittings to eliminate any chance of leaks.
Item#:
2-30-0352
Manufacturer Item:
30-0352
Manufacturer:
AEM Electronics
Available:
In Stock
Your Price:
427.78
EACH
Water/Methanol Injection Inline Filter, Installs Between WMI Tank and Pump
AEMs Water/Methanol Injection Filter can filter particulates as small as 40 microns. It protects the working parts of the water/methanol system and the engine from particulates in the water/methanol mixture when installed in-line before the water/methanol pump, and can be used on virtually any water/methanol injection system using ¼ OD tubing.
Item#:
2-30-3003
Manufacturer Item:
30-3003
Manufacturer:
AEM Electronics
Available:
In Stock
Your Price:
38.71
EACH
V2 Water/Methanol Injection Kit, Standard Controller - Internal MAP with 35
Robust, Easy to Use Controller Designs The new controller designs (Boost Dependent Kit PN 30-3300 & Multi Input Kit PN 30-3350) feature large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash resistance. A plug is integrated into the controller housing for mating to the redesigned wiring harnesss positive-lock connector. The Boost Dependent controller housing has a molded-in, barbed nipple to accept a boost hose and a wiring legend on the back. Both controller housings feature an easy to access integrated fuse and molded mounting tabs. Simplified Wiring AEMs Water/Methanol Injection kits wiring harness is terminated with a positive-lock connector on one end and has color-coded wires to ease installation. Both the power and ground wires for the pump are included in the harness which simplifies the wiring process and eliminates any chance of the pump accidentally activating from a short in the system. An additional wire is included for adding an optional on/off solenoid to stop fluid flow when the system is inactive. Integrated Boost Safe Feature The controllers in AEMs Water Methanol systems include an integrated Boost Safe output feature that monitors the entire injection system and triggers a ground signal via an output if it detects a voltage-related error (short, bad connection, broken wire, overheated pump, high or low voltage signal, etc.), allowing users to define their failsafe strategy from something as simple as flashing a warning light to more advanced strategies like pulling boost or ignition, or switching fuel maps on a standalone engine management system. Combined with the integral and highly accurate conductive low-fluid switch in the tank, Boost Safe can also put your engine in safe mode before the system runs dry. This exclusive feature is found only on AEM Water/Methanol Injection Systems. Heavy-Duty High Pressure Injection Pump AEMs internally-bypassed water/methanol injection pump does not cycle on and off and provides quiet, smooth operation. It features robust construction including integral hose fittings, EPDM seals and a Santoprene diaphragm that provides consistent and reliable fluid delivery. Low-Profile 1.15 Gallon Tank AEMs gas Water/Methanol Injection Systems are available with or without a compact 1.15 gallon tank that features an anti-starvation reservoir. A more accurate, conductive low level fluid sensor is integrated into the tank and features a positive lock connector with color-matched wires to the wiring harness. The sensor eliminates any chance of incorrect readings due to interference from debris. Machined Billet Injectors and Nozzles AEM includes one precision-machined billet injector in its gasoline Water/Methanol Injection kit. It features an integral check valve to prevent unintended fluid flow. Three billet injector nozzles are included for matching water/methanol flow to an engines horsepower output. Click the link for a Nozzle Flow Guide graph. Revised Flow Control Strategy for More Linear Fluid Delivery AEMs engineers spent extensive time revamping the controllers flow control strategy for a more linear flow output delivery. This means that the flow delivery better matches an engines need for water/methanol injection, which further optimizes charge air cooling and detonation control. Boost Dependent and Multi-Input (0-5v/frequency) progressive controller designs feature large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, integrated pump ground circuit and additional wire for optional on/off fluid solenoid Boost Safe failsafe output included (for complete failsafe under all conditions, see our Water/Methanol Failsafe Device) Heavy-duty high-pressure injection pump features integral fittings, a Santoprene diaphragm and EPDM seals to resist corrosion. Our pump maximizes line pressure for optimum atomization and its quiet, smooth operation is almost undetectable Precision-machined billet-aluminum injector with integral check valve Three interchangeable injector nozzles to cover a wide variety of HP levels (250cc/min, 500 cc/min & 1,000cc/min) 1.15 gallon tank with anti-starvation reservoir, integral conductive low-fluid sensor and positive lock connector (tank-less systems available) 20 feet of injection tubing included LED dash light for system status and low fluid warning
Item#:
2-30-3300
Manufacturer Item:
30-3300
Manufacturer:
AEM Electronics
Available:
In Stock
Your Price:
628.41
EACH
V2 Water/Methanol Injection Kit, HD Diesel Controller - Internal MAP with 4
Robust, Easy to Use Controllers The new HD controller designs feature large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash resistance. A plug is integrated into the HD controller housings for mating to the redesigned wiring harnesss positive-lock connector. The Boost Dependent HD controller housing (PN 30-3301 w/ 5 gallon tank, PN 30-3303 full kit without tank) has a molded-in, barbed nipple to accept a boost hose (up to 40 PSI) and a wiring legend on the back. The Multi-Input controller (PN 30-3351 w/ 5 gallon tank, PN 30-3352 full kit without tank) has an easy-to-remove plug covering the programming dipswitches and a programming legend on the back for the 0-5v and frequency based settings. Both controller housings feature an easy to access integrated fuse and molded mounting tabs. Simplified Wiring The wiring harnesses for AEMs Water/Methanol Injection kits are terminated with a positive-lock connector on one end and have color-coded wires to ease installation. Both the power and ground wires for the pump are included in the harness which simplifies the wiring process and eliminates any chance of the pump accidentally activating from a short in the system. An additional wire is included for adding an optional on/off solenoid to stop fluid flow when the system is inactive. Integrated Boost Safe Feature The controllers for AEMs Water Methanol systems include an integrated Boost Safe output feature that monitors the entire injection system and triggers a ground signal via an output if it detects a voltage-related error (short, bad connection, broken wire, overheated pump, high or low voltage signal, etc.), allowing users to define their failsafe strategy from something as simple as flashing a warning light to more advanced strategies like pulling boost or ignition, or switching fuel maps on a standalone engine management system. Combined with the integral and highly accurate conductive low-fluid switch in the tank, Boost Safe can also put your engine in safe mode before the system runs dry. This exclusive feature is found only on AEM Water/Methanol Injection Systems. Heavy-Duty High Pressure Injection Pump AEMs internally-bypassed water/methanol injection pump does not cycle on an off and provides quiet, smooth operation. It features robust construction including integral hose fittings, EPDM seals and a Santoprene diaphragm that provides consistent and reliable fluid delivery. Low-Profile 5 Gallon Tank AEMs Diesel Water/Meth systems are available with or without a low-profile 5 gallon tank. The 5 Gallon tank includes a high-tech conductive low fluid level indicator with a positive lock connector and color matched wires to the wiring harness, and baffles to reduce fluid slosh. Machined Billet Injectors and Nozzles AEM includes two precision-machined billet injectors in its Diesel Water/Methanol Injection kits that feature an integral check valve to prevent unintended fluid flow. Three billet injector nozzles are included for matching water/methanol flow to an engines horsepower output (see chart below). Revised Flow Control Strategy for More Linear Fluid Delivery AEMs engineers spent extensive time revamping the HD water/methanol controllers flow control strategy for a more linear flow output delivery. This means that the flow delivery better matches an engines need for water/methanol injection, which further improves charge air cooling and reduces EGTs. Boost Dependent and Multi-Input HD (external 0-5v MAP or MAF/frequency MAF) controller designs feature large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, integrated pump ground circuit and additional wire for optional on/off solenoid Boost Safe failsafe output included (for complete failsafe under all conditions, see Water/Methanol Failsafe Device) Heavy-duty high-pressure injection pump features integral fittings, a Santoprene diaphragm and EPDM seals to resist corrosion. Our pumps quiet, smooth operation is almost undetectable Two precision-machined billet-aluminum injectors with integral check valves include multiple nozzles to cover a wide range of horsepower levels 5 gallon tank with anti-slosh technology and high tech conductive low-fluid sensor with positive lock connector (tank-less systems available) 20 feet of Nylon injection tubing included LED dash light for system status and low fluid warning
Item#:
2-30-3301
Manufacturer Item:
30-3301
Manufacturer:
AEM Electronics
Available:
In Stock
Your Price:
753.05
EACH
V2 Water/Methanol Injection Nozzle and Jet Kit, Includes T Fitting, Hose, 2
This item has been discontinued and replaced by item 
AEM offers components to upgrade your existing water/methanol injection (WMI) system including inline water/methanol fluid filters, WMI flow gauges, the Water/Methanol Failsafe Device gauge, and water/methanol system nozzle and jet kits. If part of your existing AEM Water/Methanol Injection system has become damaged, we offer all of the component parts individually, including our 200 PSI water/methanol injection pump, a WMI check valve kit, water/methanol injection tubing, 1.15- and five-gallon water/methanol fluid tanks and our conductive low fluid level sensor. Please scroll down for part numbers and prices for all AEM Water/Methanol Injection accessories and replacement parts.
Item#:
2-30-3312
Manufacturer Item:
30-3312
Manufacturer:
AEM Electronics
Available:
Out of Stock
This item is discontinued
V2 Water/Methanol Injection 5 Gallon Tank Kit with Conductive Fluid Level S
AEM offers components to upgrade your existing water/methanol injection (WMI) system including inline water/methanol fluid filters, WMI flow gauges, the Water/Methanol Failsafe Device gauge, and water/methanol system nozzle and jet kits. If part of your existing AEM Water/Methanol Injection system has become damaged, we offer all of the component parts individually, including our 200 PSI water/methanol injection pump, a WMI check valve kit, water/methanol injection tubing, 1.15- and five-gallon water/methanol fluid tanks and our conductive low fluid level sensor. Please scroll down for part numbers and prices for all AEM Water/Methanol Injection accessories and replacement parts.
Item#:
2-30-3320
Manufacturer Item:
30-3320
Manufacturer:
AEM Electronics
Available:
In Stock
Your Price:
206.49
EACH
Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.
Item#:
13-46-20128
Manufacturer Item:
46-20128
Manufacturer:
AFE Power
Available:
In Stock
Your Price:
506.26
EACH
Positive Air Shutdown (Manual Controlled)-Dodge 2003-2007 5.9L
BD Diesel 1036720-M Positive Air Shutdown (Manual Controlled)-Dodge 2003-2007 5.9L Positive Air Shutdown; Manual Controlled; Incl. Air Shutoff Valve/Wiring Harness/Boot/Intake Pipe/Clamps/Velcro Strips/Module/Solder;
Item#:
23-1036720-M
Manufacturer Item:
1036720-M
Manufacturer:
BD Diesel
Available:
Out of Stock
Your Price:
825.00
EACH
E-PAS Emergency Engine Shutdown Dodge 6.7L 2007-09 Pick-Up/2007-10 Cab-Chas
BD Diesel 1036750 E-PAS Emergency Engine Shutdown Dodge 6.7L 2007-09 Pick-Up/2007-10 Cab-Chassis E-PAS Positive Air Emergency Engine Shutdown; Incl. Electronic Module/Switch Harness/Switch Decal/Switch Guard Decal/Switch Guard/Velcro Strips/Cable Ties/Window Decal;
Item#:
23-1036750
Manufacturer Item:
1036750
Manufacturer:
BD Diesel
Available:
In Stock
Your Price:
895.00
EACH
E-PAS Emergency Engine Shutdown 2014-16 3.0L Diesel Ddge/2014-15 Jeep Grd C
BD Diesel 1036752 E-PAS Emergency Engine Shutdown 2014-16 3.0L Diesel Ddge/2014-15 Jeep Grd Chrk E-PAS Positive Air Emergency Engine Shutdown; Incl. Electronic Module/Switch Harness/Switch Decal/Switch Guard Decal/Switch Guard/Velcro Strips/Cable Ties/Window Decal;
Item#:
23-1036752
Manufacturer Item:
1036752
Manufacturer:
BD Diesel
Available:
In Stock
Your Price:
895.00
EACH
E-PAS Emergency Engine Shutdown-Chevy 2008-2010 6.6L
BD Diesel 1036758 E-PAS Emergency Engine Shutdown-Chevy 2008-2010 6.6L E-PAS Positive Air Emergency Engine Shutdown; Incl. Electronic Module/Switch Harness/Switch Decal/Switch Guard Decal/Switch Guard/Velcro Strips/Cable Ties/Window Decal;
Item#:
23-1036758
Manufacturer Item:
1036758
Manufacturer:
BD Diesel
Available:
In Stock
Your Price:
895.00
EACH
X-INTAKE ELBOW-Dodge 6.7L 2008-2009
BD Diesel 1041560 X-INTAKE ELBOW-Dodge 6.7L 2008-2009 X-Intake Elbow; Incl. Intake Horn/Pipe/Gasket/Bracket/Boots/Clamps/Plugs/Thread Lock/Intake Heater Plug/Bolt Flange;
Item#:
23-1041560
Manufacturer Item:
1041560
Manufacturer:
BD Diesel
Available:
In Stock
Your Price:
633.00
EACH
|◀ 1 - 12 of 1086 ▶|
View: