|◀ 1 - 12 of 18559 ▶|
View:
2.5-inch No-Weld O2 Sensor Mount, Allows Users to Install O2 Sensor(s) With
No welding equipment? No problem with AEM's No-Weld O2 Sensor Mounts. These mounts have an integrated bung that makes it easy to install a wideband UEGO air/fuel ratio sensor using just a drill and the supplied hardware. Fits 1.75" to 3.5" exhaust pipe diameters. See the purchase tab for sizing and part numbers.
Item#:
2-30-2355-250
Manufacturer Item:
30-2355-250
Manufacturer:
AEM Electronics
Available:
In Stock
Your Price:
53.60
EACH
3-inch No-Weld O2 Sensor Mount, Allows Users to Install O2 Sensor(s) Withou
No welding equipment? No problem with AEM's No-Weld O2 Sensor Mounts. These mounts have an integrated bung that makes it easy to install a wideband UEGO air/fuel ratio sensor using just a drill and the supplied hardware. Fits 1.75" to 3.5" exhaust pipe diameters. See the purchase tab for sizing and part numbers.
Item#:
2-30-2355-300
Manufacturer Item:
30-2355-300
Manufacturer:
AEM Electronics
Available:
In Stock
Your Price:
53.60
EACH
Ford F-150 Raptor 17-20 / F-150 Limited V6-3.5L (tt)
High Flow Catalytic Converter: Factory Mounting Locations: The down-pipe mount directly to factory mounting locations and includes hardware for a hassle-free installation. Factory Style Connections: Machined, factory style flanges are used for a secure leak-free seal. MIG-Welded: Fabricated and welded by certified craftsmen for race proven strength and durability. 409 SS Construction: This down-pipe are constructed of 3" mandrel-bent, 409 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking. Note: This is a "Race Only" product used solely for competition. It's use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use including recreational off-road use, could be in violation of local, state and federal laws.
Item#:
13-48-43020-HC
Manufacturer Item:
48-43020-HC
Manufacturer:
AFE Power
Available:
Out of Stock
Your Price:
2016.36
EACH
Chevrolet Corvette (C7) & Z06 14-19 V8-6.2L/6.2L (sc)
aFe Power's introduces the PFADT Series headers for the 2014-2015 Chevrolet Corvette (C7) with the V8-6.2L engine. These headers are constructed of near equal length mandrel-bent 1-7/8" 16-gauge, 304 stainless steel tubing with thick flanges to ensure a leak free seal. The smooth curves and increased diameter of the headers helps remove restriction and keeps exhaust gas flowing smoothly for improved performance and durability.
Item#:
13-48C34110
Manufacturer Item:
48C34110
Manufacturer:
AFE Power
Available:
Out of Stock
Your Price:
1947.53
EACH
The new ATLAS exhaust was engineered to perform in the most extreme environments. Constructed from mandrel bent aluminized steel tubing for increased exhaust velocity, these systems are designed to maximize horsepower and torque gains, while lowering EGTs. The 2-piece tailpipe and bayonet style hangers provide a hassle-free installation. To provide a leak-free seal, OE style band clamps are included to offer an improved seal.
Item#:
13-49-03041NM
Manufacturer Item:
49-03041NM
Manufacturer:
AFE Power
Available:
In Stock
Your Price:
635.86
EACH
Dodge/RAM 1500 09-18 / RAM 1500 Classic 2019 V8-5.7L HEMI
The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.
Item#:
13-49-42013-P
Manufacturer Item:
49-42013-P
Manufacturer:
AFE Power
Available:
In Stock
Your Price:
1436.42
EACH
The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.
Item#:
13-49-43037-P
Manufacturer Item:
49-43037-P
Manufacturer:
AFE Power
Available:
In Stock
Your Price:
947.72
EACH
Introducing an all new Rebel Series Dual Center Exit Cat-Back exhaust system for the Jeep Wrangler (JK) with V6-3.6L/3.8L engine. This unique Rebel Series exhaust system is designed with dual center exit tips for an aggressive look. The Tips are 4-1/2" with aFe power plates and constructed out of stainless steel for durability. This performance cat-back exhaust is constructed of 2-1/2" MIG-welded mandrel-bent stainless steel tubing. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response. In testing, this cat-back exhaust system added an astounding +9 horsepower and +14 lbs. x ft. of torque as verified by our in house dyno. This exhaust system comes complete with a 22" free-flowing muffler, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation.
Item#:
13-49-43078-B
Manufacturer Item:
49-43078-B
Manufacturer:
AFE Power
Available:
In Stock
Your Price:
1155.62
EACH
This Rebel Series cat-back is designed with dual black exhaust tips that exit in front of the rear passenger tire for a unique, aggressive look. The tips come with unique laser-etched aFe Power logos on the side and are constructed from stainless steel for durability. The exhaust system is constructed from 3" MIG-welded, mandrel bent stainless steel tubing for maximum flow, increased horsepower and torque. The performance cat-back exhaust system includes necessary hardware and clamps for a hassle-free install, with no cutting required making it a true bolt on system. 3-1/2" Dia. Black Middle-Side Exit Tips: Finishing off the exhaust are dual 3-1/2" diameter black 304 stainless steel clamp-on tips with a laser-etched aFe power logo on the side for an aggressive style. The tips are designed to exit from in front of the rear passenger side tire for a unique custom look. Installation Is A Snap: This Rebel Series exhaust system uses factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the ha nger bushing in place for an OE-style fit that does not change with time. This makes for an easy installation with no cutting required.
Item#:
13-49-43091-B
Manufacturer Item:
49-43091-B
Manufacturer:
AFE Power
Available:
In Stock
Your Price:
1287.92
EACH
aFe power introduces an all new Rebel Series dual middle-side exit exhaust system. cat-back is designed with dual polished exhaust tips that exit in front of the rear passenger tire for a unique, aggressive look. The tips come with unique laser-etched aFe Power logos on the side and are constructed from stainless steel for durability. The exhaust system is constructed from 3" MIG-welded, mandrel bent stainless steel tubing for maximum flow, increased horsepower and torque. The performance cat-back exhaust system includes necessary hardware and clamps for a hassle-free install, with no cutting required making it a true bolt on system. 3-1/2" Dia. Polished Middle-Side Exit Tips: Finishing off the exhaust are dual 3-1/2" diameter polished 304 stainless steel clamp-on tips with a laser-etched aFe power logo on the side for an aggressive style. The tips are designed to exit from in front of the rear passenger side tire for a unique custom look. Installation Is A Snap: This Rebel Series exhaust system uses factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. This makes for an easy installation with no cutting required.
Item#:
13-49-43091-P
Manufacturer Item:
49-43091-P
Manufacturer:
AFE Power
Available:
In Stock
Your Price:
1228.52
EACH
The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.
Item#:
13-49-44012-B
Manufacturer Item:
49-44012-B
Manufacturer:
AFE Power
Available:
In Stock
Your Price:
932.86
EACH
The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.
Item#:
13-49-44016-P
Manufacturer Item:
49-44016-P
Manufacturer:
AFE Power
Available:
In Stock
Your Price:
873.46
EACH
|◀ 1 - 12 of 18559 ▶|
View: