|◀ 1 - 12 of 1478 ▶|
View:
Dodge Diesel Trucks 03-07 L6-5.9L (td)
The BladeRunner intake manifold represents the next generation in intake manifold design. The BladeRunner intake manifold uses a unique MDV (Multiple Directional Vane) technology to guide the air through the manifold maximizing air flow. Constructed out of cast A356-T6 aluminum and uses a proprietary internal bolt design to help increase the flow and provide a solid seal void of leaks or deformaties. the BladeRunner comes with up to 5 ports for nitrous injections, gauges and other accessories used by hardcore enthusiasts. In recent testing the BladeRunner intake manifold outflowed the factory intake by 32.9% and produced 17hp and 50lbs. x ft torque at 1975rpm. This intake is specifically designed to provide increased intake volume and velocity.
Item#:
13-46-10011
Manufacturer Item:
46-10011
Manufacturer:
AFE Power
Available:
In Stock
Your Price:
475.19
EACH
Dodge Diesel Trucks 98.5-02 L6-5.9L (td)
The Bladerunner intake manifold represents the next generation in intake manifold design. The Bladerunner intake manifold uses a unique MDV (Multiple Directional Vane) technology to guide the air through the manifold maximizing air flow. Constructed out of cast A356-T6 aluminum and uses a proprietary internal bolt design to help increase the flow and prov ide a solid seal void of leaks or deformaties. the Bladerunner comes with 3 or 5 ports for nitrous injections, gauges and other accessories used by hardcore enthusiasts.
Item#:
13-46-10021
Manufacturer Item:
46-10021
Manufacturer:
AFE Power
Available:
In Stock
Your Price:
475.19
EACH
Flow and Performance: The intercooler tubes are constructed of 3" mandrel bent aluminum tubing for maximum flow then powder-coated wrinkle-black for heat and corrosion resistance. The smooth bends and larger diameter tubing allow for low turbulence, increasing horsepower, torque and lowering EGT's. Installation is a snap: Utilizes the factory mounting locations to provide stability for a hassle-free installation. Includes heavy-duty 5-Ply couplings for strength. These tube kit works with stock or aFe's upgraded intercooler (46-20102-1). aFe Badging: Unique laser-cut aFe Power logo plates are welded-on for an aggressive style. DETAILS: Outflows stock intercooler tubes Replacement tubes for both hot and cold side of the intercooler Constructed out of 3" mandrel-bent aluminum tubing Powder-coated wrinkle-black for heat resistance and long-life Includes high-temp couplings and high quality stainless steel clamps Couplings constructed out of heavy-duty high-temp 5-Ply polyester for heat-resistance and durability Bolt-on Kit fits with the factory or aFe's upgraded intercooler Note: This Intercooler kit is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles. Fits: 2003-2007 Ford Super Duty F-250/F-350 V8-6.0L (td) Power Stroke
Item#:
13-46-20104-B
Manufacturer Item:
46-20104-B
Manufacturer:
AFE Power
Available:
Out of Stock
Your Price:
521.11
EACH
The Bladerunner charge pipes produce 20 hp and 63 lbs./ft/ torque and outflow the factory tubes by 45 percent. With the increased flow of this Charge Pipe it will reduce you exhaust gas temperatures by 100 deg..
Item#:
13-46-20109
Manufacturer Item:
46-20109
Manufacturer:
AFE Power
Available:
In Stock
Your Price:
275.40
EACH
Perfect Fit: Utilizes the factory mounting locations for a hassle-free installation. Includes high quality stainless steel T-bolt clamps and heavy-duty 5-Ply polyester reinforced couplings for strength and durability. The tubes also work with OEM or aFe's upgraded intercooler (46-20111). Flow and Performance: aFe Power's intercooler tubes are constructed from 3" (hot side) and 3" (cold side) mandrel-bent aluminum tubing for maximum flow then, powder-coated for a nice finish. The high-temp wrinkle-black powder-coating also insulates the tubes from engine heat and protects the tube from corrosion. The smooth transition bends decrease turbulence, minimize pressure loss, while increasing horsepower and torque. aFe Badging: A unique laser-cut aFe Power logo plate is welded-on for an aggressive style. DETAILS: Outflows stock intercooler tubes by 15% 3" Hot-Side & Cold-side mandrel-bent aluminum tubing Powder-coated wrinkle-black for heat and corrosion resistance Includes premium stainless steel T-bolt clamps and silicone couplings for long life, perfect fit and strength Works with aFe or OE intercooler Uses all factory mounting locations for a hassle-free installation Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicle.
Item#:
13-46-20114-B
Manufacturer Item:
46-20114-B
Manufacturer:
AFE Power
Available:
Out of Stock
Your Price:
577.81
EACH
Eliminate the costly exhaust manifold cracks prevalent in the factory exhaust manifold. The aFe Bladerunner exhaust manifold for the popular 5.9L Dodge Ram Cummins sets the new standard. Constructed out of cast 304 stainless steel with a reinforcing rib for strength along the flange and ultra-thick wall flange at the port. The Bladerunner exhaust manifold out flowed the factory exhaust by 23-percent improving exhaust flow, performance and throttle response. This manifold also features 2 EGT probe ports, thick wall design for increased strength (0.25" vs 0.15" for the stock unit), matched ports and has a merged runner design to maximize maximize exhaust flow. Once you install this awesome exhaust manifold, you will feel improved turbo spool up times, improved throttle response and performance.
Item#:
13-46-40012
Manufacturer Item:
46-40012
Manufacturer:
AFE Power
Available:
In Stock
Your Price:
594.00
EACH
Eliminate the costly exhaust manifold cracks prevalent in the factory exhaust manifold. The aFe BladeRunner exhaust manifold for the popular 98.5-02 5.9L Dodge Ram Cummins (24V) sets a new standard. In recent testing, this exhaust manifold outflowed the factory exhaust manifold by 50% improving performance and throttle response. The thick wall (0.25in. vs. 0.15in.) design increases strength eliminating warping and cracking. The matched ports and a merged runner design reduces exhaust backpressure, maximizing exhaust flow. Once you install this awesome exhaust manifold, you will feel improved turbo spool up times, improved throttle response and increased performance.
Item#:
13-46-40032
Manufacturer Item:
46-40032
Manufacturer:
AFE Power
Available:
In Stock
Your Price:
594.00
EACH
Dodge Diesel Trucks 03-07 L6-5.9L (td)
Specifications: Compressor Inducer - 60 mm/Trim: 45 Compressor Exducer - 89.7 mm Turbine Inducer - 65 mm Turbine Exducer - 58 mm Turbo Housing: 12 CM2. Billet Wheel: The compressor features a gold anodized 7/14 bladed billet aluminum compressor wheel that is lighter and stronger than the stock cast wheel to help provide quicker "spool-up" and higher air flow than the stock turbo. Compressor: The compressor features a light-weight billet aluminum compressor wheel with a 60mm inducer and 89.7mm exducer to improve turbo spool-up, handle high wheel speeds, and boost pressures. Also included is a CNC-machined, black anodized billet adjustable aluminum wastegate actuator. Direct Replacement: This turbo can be installed on 2003-2007 model years as a direct bolt-on replacement. All connections to the vehicle are compatible with the OE geometry, resulting in a quick and reliable connection. Maximum gains are achieved from fuel system upgrades, either electronic or mechanical.
Item#:
13-46-60052-1
Manufacturer Item:
46-60052-1
Manufacturer:
AFE Power
Available:
In Stock
Your Price:
2286.45
EACH
Interested in a new exhaust system. Check out the ATLAS DPF-Back Exhaust system form aFe. This system is constructed from 5 in. mandrel-bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Uses high quality band clamps and OE-style bayonet hangers. Uses all factory mounting locations to provide a quick, hassle-free installation. Includes a massive 6 in. polished 304 stainless tip with a laser-cut stainless steel aFe power badge. Tip features a drain port on the bottom to keep rust and corrosion away. High quality OE-style flange and band clamps are used for a complete 360 degree sealing surface. All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.
Item#:
13-49-03064-B
Manufacturer Item:
49-03064-B
Manufacturer:
AFE Power
Available:
In Stock
Your Price:
675.00
EACH
The Large Bore HD Performance DPF-Back exhaust features 4" 409 stainless steel tubing with smooth curves and increased size to help remove restriction and keeps exhaust gasses flowing smoothly. The OE style band-clamps and bayonnet style hangers make sure this system installs cleanly and easily.
Item#:
13-49-13028
Manufacturer Item:
49-13028
Manufacturer:
AFE Power
Available:
In Stock
Your Price:
631.80
EACH
Engineered to perform in the most extreme environments. Constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque and lower EGTS. All systems use factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface. A free flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe locations during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.
Item#:
13-49-42016
Manufacturer Item:
49-42016
Manufacturer:
AFE Power
Available:
In Stock
Your Price:
631.80
EACH
Engineered to perform in the most extreme environments. Constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque and lower EGTS. All systems use factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface. A free flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe locations during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.
Item#:
13-49-42044-B
Manufacturer Item:
49-42044-B
Manufacturer:
AFE Power
Available:
In Stock
Your Price:
1225.81
EACH
|◀ 1 - 12 of 1478 ▶|
View: