PARTS SEARCHED FOR Amplifiers - 4 - Channel Amplifiers

Benefit:

• 100W x 4 channels @ 4 ohms
• 150W x 4 channels @ 2 ohms
• 450W x 2 channel bridged @ 2 ohms
• Q-Tune™ technology will combine your main speakers with the subwoofers
• forced air cooling system
• Variable low and high crossovers
• Q-Control feature
• capable of stereo or mono operation with its DualMode™ feature.

Benefits:

• 75W x 4 channels @ 4 ohms
• 120W x 4 channels @ 2 ohms
• 250W x 2 channel bridged @ 2 ohms
• Q-Tune™ technology will combine your main speakers with the subwoofers
• forced air cooling system
• Variable low and high crossovers 
• Q-Control feature
• capable of stereo or mono operation with its DualMode™ feature.

Benefits:

• 4-channel
• 50 watts RMS per channel
• 160 watts RMS each in 2-channel mode
• bridge the rear channels to send 160 watts to a sub while the front channels run your full-range speakers
• Q-Tune™ technology lets you bump up your bass
• noise-cancellation circuitry

Benefits:

• 4-channel
• 70 watts x 4-channels wired at 4 ohms
• 125 watts x 4-channels wired at 2 ohms
• gold-plated RCA level inputs & screw terminals
• MOSFET power supply
• low-level, or high-level inputs
• fully adjustable low-pass/high-pass crossovers

Benefits:

• double-extrusion heat sink
• 150w x 4 at 4 Ohms
• 250w x 4 at 2 Ohms
• 150w x 2 + 500w x 1 at 4 Ohms
• 250w x 2 at 2 Ohms + 500w x 1 at 4 Ohms
• 500w x 2 at 4 Ohms

Benefits:

• pre-amplified inputs
• hi-level inputs
• Real 12dB/Oct. continuously adjustable (40 to 400Hz) active crossover
• Lo-Pass/Hi-Pass or Full Range settings
• optimized cooling system
• 70w x 4@4Ohms 100w x 4@2Ohms
• 70w x 2 + 200w x 1@4Ohms
• 100w x 2@2Ohms + 200w x 1@4Ohms
• 200w x 2@4 Ohms

Benefits:

• 2, 3 or 4 channel
• 40 W x 4 @ 4 ohms
• 60 W x 4 @ 2 ohms
• 130 W x 2 Bridged @ 4 ohms

Benefits: 

• 44% smaller than our previous year model
• 60 W x 4 @ 4 ohms
• 90 W x 4 @ 2 ohms
• 180 W x 2 Bridged @ 4 ohms

Benefits:

• configured to operate in four, three or two channel modes
• 4 Ch 130W x 2 (4O) + 140W x 2 (4O)
• 4 Ch 230W x 2 (2O) + 250W x 2 (2O)
• 4 Ch 130W x 2 (4O) + 250W x 2 (2O)
• 4 Ch 130W x 2 (4O) + 400W x 2 (1O)
• 4 Ch 200W x 2 (2O) + 350W x 2 (1O)
• 3 Ch 130W x 2 (4O) + 500W x 1 (4O)
• 3 Ch 130W x 2 (4O) + 800W x 1 (2O)
• 3 Ch 230W x 2 (2O) + 500W x 1 (4O)
• 3 Ch 200W x 2 (2O) + 700W x 1 (2O)

Benefits:

• configured to operate in four, three or two channel modes
• 4 Ch 75 W x 4 (4O)
• 4 Ch 130 W x 4 (2O)
• 3 Ch 75 W x 2 (4O) + 260 x 1 (4O)
• 3 Ch 130 W x 2 (2O) + 260 x 1 (4O)
• 2 Ch 260 W x 2 (4O)

Benefits:

• full-range 4-channel amplifier
• Class-D design
• tri-stage protection that covers thermal, over-current and short circuits
• On-board Punch Bass
• 150 Watts x 4 @ 4-Ohm
• 250 Watts x 4 @ 4-Ohm
• 500 Watts x 2 @ 4-Ohm Bridged

Benefits:

• 50 Watts x 4 @ 4-Ohm
• 100 Watts x 4 @ 2-Ohm
• 200 Watts x 2 @ 4-Ohm Bridged

Benefits:

• bridge both channels to create a high power 2-channel amp
• run stereo speakers on the front with subwoofers on the rear in 3-channel mode
• variable HP/LP crossover
• built-in Punch EQ
• Pass-Thru RCA jacks
• 60 Watts x 4 @ 4-Ohm
• 125 Watts x 4 @ 2-Ohm
• 250 Watts x 2 @ 4-Ohm Bridged

Benefits:

• full-range amplifier
• Class-D design
• tri-stage protection that covers thermal, over-current and short circuits
• On-board Punch Bass
• 75 Watts x 4 @ 4-Ohm
• 125 Watts x 4 @ 4-Ohm
• 220 Watts x 2 @ 4-Ohm Bridged

Benefits:

• full-range 4-channel amplifier
• BRT (Boosted Rail Technology)
• variable hi-level DC offset turn-on for easy installation into any OEM system
• Great for motorcycles and recreational vehicles
• 75 Watts x 4 @ 4-Ohm

Premier™ PRS-Series 4-Channel Full-Range Class FD Amplifier with ICEpower Technology

• 1200 Watts Maximum Power
• Bridgeable 4/3/2 Channel
• ICEpower Full-Range Class FD

Benefits:

• 4-channel amplifier
• 50 Watts x 4 @ 4-Ohm
• 75 Watts x 4 @ 2-Ohm
• 150 Watts x 2 @ 4-Ohm Bridged

Benefits:

• Class-D circuitry
• able to power a full-range system
• 75 Watts x 4 @ 4-Ohm
• 100 Watts x 4 @ 2-Ohm
• 200 Watts x 2 @ 4-Ohm Bridged

Benefits:

• Class-D circuitry
• able to power a full-range system
• 100 Watts x 4 @ 4-Ohm
• 150 Watts x 4 @ 2-Ohm
• 300 Watts x 2 @ 4-Ohm Bridged

Benefits:

• characteristics of Class-A designs with efficiency of a Class-D
• dynamic switching frequency control
• Constant Power circuitry
• 250 Watts x 4 @ 4-Ohm
• 250 Watts x 4 @ 2-Ohm
• 250 Watts x 4 @ 1-Ohm
• 500 Watts x 2 @ 4-Ohm Bridged
• 500 Watts x 2 @ 2-Ohm Bridged

Benefits:

• Dynamic Thermal Management
• small chassis design
• 60 Watts x 4 @ 4-Ohm
• 100 Watts x 4 @ 2-Ohm
• 200 Watts x 2 @ 4-Ohm Bridged
• 2-Ohm x 2 Bridged Stable

Benefits:

• built-in crossover
• 100 Watts x 4 @ 4-Ohm
• 150 Watts x 4 @ 2-Ohm
• 300 Watts x 2 @ 4-Ohm Bridged
• 2-Ohm x 2 Bridged Stable

Benefits:

• characteristics of Class-A designs with efficiency of a Class-D
• dynamic switching frequency control
• Constant Power circuitry
• 150 Watts x 4 @ 4-Ohm
• 150 Watts x 4 @ 2-Ohm
• 200 Watts x 4 @ 1-Ohm
• 300 Watts x 2 @ 4-Ohm Bridged
• 400 Watts x 2 @ 2-Ohm Bridged.

Benefits:

• K-STAT output transistors
• 100 W x 4 @ 4 ohms
• 150 W x 4 @ 2 ohms
• 300 W x 2 Bridged @ 4 ohms